B1850 GMC Code - Driver Seat Lumbar Position Sensor Circuit
Quick Answer
The Driver Seat Module (DSM) monitors the positions of most of the seat adjuster motors using hall effect type position sensors. Common causes include Faulty Driver Seat Lumbar Position Sensor, Driver Seat Lumbar Position Sensor harness is open or shorted, Driver Seat Lumbar Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1850 GMC indicates Driver Seat Lumbar Position Sensor Circuit.
- Common causes
- Common causes include Faulty Driver Seat Lumbar Position Sensor, Driver Seat Lumbar Position Sensor harness is open or shorted, Driver Seat Lumbar Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1850 GMC Description
What are the Possible Causes of the DTC B1850 GMC?
- Faulty Driver Seat Lumbar Position Sensor
- Driver Seat Lumbar Position Sensor harness is open or shorted
- Driver Seat Lumbar Position Sensor circuit poor electrical connection
- Faulty Driver Seat Module (DSM)
How to Fix the DTC B1850 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1850 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1850 GMC code?
Need more information on how to fix the B1850 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1850 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1850 GMC Code
1. What are the common symptoms of OBDII code B1850 for GMC related to the Driver Seat Lumbar Position Sensor Circuit?
- Common symptoms include an illuminated airbag warning light on the dashboard, inoperative lumbar support adjustments, and potential loss of power seat functions.
2. What could cause OBDII code B1850 GMC to trigger for the Driver Seat Lumbar Position Sensor Circuit?
- Possible causes of this code include a faulty lumbar position sensor, damaged wiring or connectors in the circuit, or issues with the seat control module.
3. How can I diagnose the OBDII code B1850 in my GMC for the Driver Seat Lumbar Position Sensor Circuit?
- Diagnosis typically involves using a scan tool to retrieve the specific trouble code, conducting a visual inspection of the sensor and related components, and performing electrical tests to pinpoint the issue.
4. What are the repair options for resolving OBDII code B1850 related to the Driver Seat Lumbar Position Sensor Circuit?
- Repair options may include repairing or replacing damaged wiring, connectors, or the lumbar position sensor itself. In some cases, recalibrating the seat control module may also be necessary.
5. Is it safe to continue driving my GMC with OBDII code B1850 for the Driver Seat Lumbar Position Sensor Circuit?
- It is generally not recommended to drive the vehicle with unresolved airbag-related issues, as it may compromise occupant safety in the event of a collision. Prompt diagnosis and repair are advised.
6. Can I reset the OBDII code B1850 in my GMC related to the Driver Seat Lumbar Position Sensor Circuit on my own?
- While you can attempt to clear the code using an OBDII scan tool, it is important to address the underlying issue causing the code to prevent it from reoccurring and potentially affecting the airbag system's functionality.
7. Are there any preventive maintenance tips to avoid OBDII code B1850 GMC for the Driver Seat Lumbar Position Sensor Circuit?
- Regularly inspecting the seat components for damage or wear, avoiding placing heavy objects on the seat, and addressing any abnormal seat adjustment issues promptly can help prevent this code from occurring.
8. Can extreme temperatures or humidity affect the likelihood of triggering OBDII code B1850 for the Driver Seat Lumbar Position Sensor Circuit in a GMC?
- Yes, extreme temperature variations or high humidity levels can potentially cause electrical connections to degrade or malfunction, leading to the triggering of this code.
9. How long does it typically take to repair OBDII code B1850 in a GMC related to the Driver Seat Lumbar Position Sensor Circuit?
- The repair duration can vary based on the specific cause of the code and the extent of the necessary repairs. It may range from a quick fix to a more involved troubleshooting process.
10. Will OBDII code B1850 GMC for the Driver Seat Lumbar Position Sensor Circuit affect the overall drivability of the vehicle?
- While this code may not directly impact the vehicle's drivability, it is crucial to address it promptly to ensure the proper functioning of the airbag system and related safety features.
Discuss the causes and fixes for B1850 GMC OBDII Code
Code B1850 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
