AutoCodes – Generic – B1832

B1832 Code - Short to Ground in Curtain Shield Squib Right Circuit

Quick Answer

The Curtain Shield Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and the Curtain Shield Airbag Right (RH). Common causes include Faulty Curtain Shield Airbag Right (RH) (Curtain Shield Squib Right), Curtain Shield Airbag Right harness is open or shorted, Curtain Shield Airbag Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1832 indicates Short to Ground in Curtain Shield Squib Right Circuit.
Common causes: Common causes include Faulty Curtain Shield Airbag Right (RH) (Curtain Shield Squib Right), Curtain Shield Airbag Right harness is open or shorted, Curtain Shield Airbag Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,917

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1832 Description

The Curtain Shield Squib Right (RH) Circuit consists of the Center Airbag Sensor Assembly and the Curtain Shield Airbag Right (RH). The Curtain Shield Airbag is mounted between the front and rear pillars on both the driver and passenger sides. The circuit instructs the Supplemental Restraint System (SRS) to deploy when the deployment conditions are met. The Diagnostic Trouble Code (DTC) is recorded when a malfunction is detected in the Curtain Shield Squib Right Circuit.

OBDII Code B1832 - Short to Ground in Curtain Shield Squib Right Circuit - AutoCodes.com — B1832 Code - Short to Ground in Curtain Shield Squib Right Circuit

What does this mean?

What are the Possible Causes of the DTC B1832?

Faulty Curtain Shield Airbag Right (RH) (Curtain Shield Squib Right)
Curtain Shield Airbag Right harness is open or shorted
Curtain Shield Airbag Right circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1832?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1832 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1832 code?

Need more information on how to fix the B1832 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1832 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1832 Lexus — Short to Ground in Curtain Shield Squib Right Circuit
B1832 Scion — Short to Ground in Curtain Shield Squib Right Circuit
B1832 Toyota — Short to Ground in Curtain Shield Squib Right Circuit

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1832 Code

1. What are common symptoms of OBDII code B1832 (Short to Ground in Curtain Shield Squib Right Circuit)?

- Common symptoms include the airbag warning light staying illuminated, loss of functionality in the right curtain shield airbag, and potential triggering of the vehicle's safety system.

2. What are possible causes of OBDII code B1832?

- Causes of this code may include damaged wiring in the curtain shield squib right circuit, a short to ground in the circuit, or a malfunctioning curtain shield squib right component.

3. How can I diagnose OBDII code B1832?

- Diagnosing this code involves using an OBDII scanner to read the fault codes, checking the right curtain shield airbag system for any visible damage, and testing the circuit for continuity and shorts.

4. Can I still drive my vehicle with OBDII code B1832 present?

- It is not recommended to drive the vehicle with this code present, as it indicates a potential issue with the right curtain shield airbag system, which is a critical safety component.

5. How can I repair OBDII code B1832?

- Repairing this code typically involves repairing or replacing damaged wiring in the curtain shield squib right circuit, addressing any shorts to ground, and potentially replacing the curtain shield squib right component.

6. Is it safe to reset the OBDII code B1832 without fixing the underlying issue?

- It is not safe to reset the code without addressing the underlying issue, as it could compromise the functionality of the right curtain shield airbag system in the event of an accident.

7. Can a DIY enthusiast fix OBDII code B1832 at home?

- While some basic troubleshooting steps can be performed at home, diagnosing and repairing OBDII code B1832 may require specialized tools and expertise best handled by a professional technician.

8. How much does it typically cost to repair OBDII code B1832?

- The cost of repairing this code can vary depending on the extent of the damage and the specific components that need to be repaired or replaced. It's best to consult with a mechanic for an accurate estimate.

9. Are there any safety precautions to follow when working on OBDII code B1832?

- When working on this code, always disconnect the vehicle's battery, wear appropriate safety gear, and follow recommended procedures to avoid accidental deployment of the airbag system.

10. How long does it usually take to repair OBDII code B1832?

- The repair time for this code can vary depending on the complexity of the issue, availability of parts, and the technician's experience. In general, it may take a few hours to a full day to complete the repair.