AutoCodes – Toyota – B1825 2013 Toyota RAV4

B1825 2013 Toyota RAV4 Code - Short in Side Squib Left Circuit

Quick Answer

The Front Side Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Left (LH). Common causes include Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left), Front Seat Side Airbag Assembly LH harness is open or shorted, Front Seat Side Airbag Assembly LH circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1825 2013 Toyota RAV4 indicates Short in Side Squib Left Circuit.
Common causes: Common causes include Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left), Front Seat Side Airbag Assembly LH harness is open or shorted, Front Seat Side Airbag Assembly LH circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 320

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1825 2013 Toyota RAV4 Description

The Front Side Squib Left (LH) Circuit consists of the Center Airbag Sensor Assembly and Front Seat Airbag Assembly Left (LH). The circuit instructs the Supplemental Restraint System (SRS) to deploy when deployment conditions are met. The Diagnostic Trouble Code (DTC) is stored when a malfunction is detected in the Front Side Squib Left (LH) Circuit.

OBDII Code B1825 2013 Toyota RAV4 - Short in Side Squib Left Circuit - AutoCodes.com — B1825 2013 Toyota RAV4 Code - Short in Side Squib Left Circuit

What does this mean?

What are the Possible Causes of the DTC B1825 2013 Toyota RAV4?

Faulty Front Seat Airbag Assembly Left (LH) (Front Side Squib Left)
Front Seat Side Airbag Assembly LH harness is open or shorted
Front Seat Side Airbag Assembly LH circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1825 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1825 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1825 2013 Toyota RAV4 code?

Need more information on how to fix the B1825 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1825 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1825 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1825 in a 2013 Toyota RAV4?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the vehicle's airbag system.

2. What does the OBDII code B1825 "Short in Side Squib Left Circuit" mean for a 2013 Toyota RAV4?

- This code indicates a detected short circuit in the side squib (airbag) left circuit of the driver's side airbag system.

3. What are the possible causes of OBDII code B1825 in a 2013 Toyota RAV4?

- The code may be triggered by damaged wiring, faulty connectors, a malfunctioning squib (airbag) module, or issues with the airbag system's control unit.

4. How can I diagnose the cause of OBDII code B1825 in my 2013 Toyota RAV4?

- Diagnosis typically involves inspecting the wiring harness, connectors, and components of the driver's side airbag system for any visible damage or issues. A scan tool can also help pinpoint the exact location of the fault.

5. Is it safe to drive with OBDII code B1825 present in a 2013 Toyota RAV4?

- It is not recommended to drive the vehicle with this code active, as it indicates a potential fault in the airbag system, which could compromise occupant safety in the event of a collision.

6. Can I reset the OBDII code B1825 in my 2013 Toyota RAV4 without fixing the issue?

- While you can clear the code with an OBDII scanner, it is important to address the underlying cause to ensure the proper functioning of the airbag system and overall safety of the vehicle.

7. How can I repair OBDII code B1825 in my 2013 Toyota RAV4?

- Repair typically involves fixing the short circuit in the side squib left circuit, which may require repairing or replacing damaged wiring, connectors, or components in the airbag system.

8. Should I attempt to repair OBDII code B1825 in my 2013 Toyota RAV4 myself?

- Due to the critical nature of the airbag system, it is recommended to have this issue diagnosed and repaired by a qualified automotive technician to ensure proper repair and safety compliance.

9. Are there any safety precautions I should take when working on OBDII code B1825 in my 2013 Toyota RAV4?

- When working on the airbag system, always disconnect the vehicle's battery and wait at least 3 minutes before starting any repairs to prevent accidental deployment of the airbags.

10. How much does it typically cost to repair OBDII code B1825 in a 2013 Toyota RAV4?

- The cost of repairing this code can vary depending on the exact cause of the issue, but it may involve expenses for diagnostic labor, replacement parts, and any necessary repairs to the airbag system.