B1812 Scion Code - Short To Ground In Driver Side Squib 2nd Step Circuit
Quick Answer
The Driver Side Squib 2nd Step Circuit consists of the Center Airbag Sensor Assembly, the Spiral Cable, and the Steering Pad. Common causes include Instrument panel wire, Faulty Spiral cable, Faulty Steering Pad (Driver Side Squib 2nd Step). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1812 Scion indicates Short To Ground In Driver Side Squib 2nd Step Circuit.
- Common causes
- Common causes include Instrument panel wire, Faulty Spiral cable, Faulty Steering Pad (Driver Side Squib 2nd Step).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1812 Scion Description
What are the Possible Causes of the DTC B1812 Scion?
- Instrument panel wire
- Faulty Spiral cable
- Faulty Steering Pad (Driver Side Squib 2nd Step)
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1812 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1812 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1812 Scion code?
Need more information on how to fix the B1812 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1812 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1812 Scion Code
1. What are the common symptoms of OBDII code B1812 in a Scion related to a short to ground in the driver side squib 2nd step circuit?
- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential non-deployment of the driver side airbag in the event of a collision.
2. What could cause OBDII code B1812 in a Scion, indicating a short to ground in the driver side squib 2nd step circuit?
- This code typically indicates a wiring issue, such as a short to ground in the driver side squib 2nd step circuit, a faulty airbag module, or a problem with the driver side airbag itself.
3. How can I diagnose the short to ground in the driver side squib 2nd step circuit causing OBDII code B1812 in my Scion?
- Diagnosing this issue requires a thorough inspection of the wiring harness, connectors, and components associated with the driver side airbag system using a multimeter and electrical schematics.
4. Is it safe to drive my Scion with OBDII code B1812 present?
- It is not recommended to drive the vehicle with this code present as it indicates a potential issue with the driver side airbag system, which could compromise occupant safety in the event of a collision.
5. How can I repair OBDII code B1812 in my Scion due to a short to ground in the driver side squib 2nd step circuit?
- Repairing this issue involves locating and addressing the short to ground, repairing or replacing damaged wiring, connectors, or components in the driver side squib 2nd step circuit, and clearing the fault codes.
6. Can resetting the OBDII code B1812 in my Scion fix the issue temporarily?
- Resetting the code may temporarily turn off the airbag warning light, but it will not fix the underlying issue causing the short to ground in the driver side squib 2nd step circuit.
7. Are there any safety precautions to take when working on the driver side airbag system in a Scion with OBDII code B1812?
- It is crucial to disconnect the vehicle's battery and wait for at least 10 minutes before working on the airbag system to prevent accidental deployment, which can cause serious injury.
8. Can a DIY enthusiast with basic automotive knowledge repair OBDII code B1812 in a Scion?
- While some DIYers may be able to diagnose and repair simple wiring issues, dealing with the driver side airbag system and related circuits requires specialized knowledge and precautions, so professional assistance is recommended.
9. How much does it typically cost to repair OBDII code B1812 in a Scion at a dealership or repair shop?
- The cost of repairing this issue can vary depending on the extent of the damage, parts needed, and labor rates, but it can range from a few hundred to over a thousand dollars at a dealership or repair shop.
10. Can OBDII code B1812 in a Scion affect the functionality of other vehicle systems?
- While this code specifically relates to the driver side airbag system, a fault in this system can sometimes trigger a safety system shutdown, affecting the functionality of other safety features like seatbelt pretensioners or side airbags.
Discuss the causes and fixes for B1812 Scion OBDII Code
Code B1812 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
