B1811 Dodge Code - Driver Door Ajar Input Circuit High
Quick Answer
The Powertrain Control Module (PCM) receives a message over the CAN BUS from the Body Control Module (BCM) that there is a fault with the Left Front Door Switch Assembly. Common causes include Faulty Left Front Door Latch Assembly, Left Front Door Latch Assembly harness is open or shorted, Left Front Door Latch Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1811 Dodge indicates Driver Door Ajar Input Circuit High.
- Common causes
- Common causes include Faulty Left Front Door Latch Assembly, Left Front Door Latch Assembly harness is open or shorted, Left Front Door Latch Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1811 Dodge Description
What are the Possible Causes of the DTC B1811 Dodge?
- Faulty Left Front Door Latch Assembly
- Left Front Door Latch Assembly harness is open or shorted
- Left Front Door Latch Assembly circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B1811 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1811 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1811 Dodge code?
Need more information on how to fix the B1811 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1811 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1811 Dodge Code
1. What are the common symptoms of OBDII code B1811 for a Dodge, indicating a Driver Door Ajar Input Circuit High issue?
- The common symptoms include the interior lights staying on, the door ajar warning light constantly illuminated, and possible issues with power door locks.
2. What are the typical causes of the Driver Door Ajar Input Circuit High trouble code in a Dodge vehicle?
- The main causes can include a faulty door ajar switch, damaged wiring or connectors in the door circuit, or a malfunctioning body control module.
3. How can I diagnose the Driver Door Ajar Input Circuit High problem in my Dodge?
- You can start by inspecting the door ajar switch for any physical damage, checking the wiring and connectors for signs of wear or corrosion, and using a multimeter to test the circuit continuity.
4. What are some DIY repair tips for fixing the B1811 code related to the Driver Door Ajar Input Circuit High in a Dodge?
- DIY repair tips may include cleaning the door contacts and connectors, replacing a faulty door ajar switch, repairing damaged wiring, or resetting the body control module.
5. Can the Driver Door Ajar Input Circuit High issue affect the overall performance or safety of my Dodge vehicle?
- While the issue may not directly impact the drivability of the vehicle, it can lead to battery drain, interior lighting problems, and potential security concerns due to malfunctioning door locks.
6. Is it recommended to address the OBDII code B1811 promptly, or can it be ignored for a while?
- It is advisable to address the issue promptly to prevent potential electrical problems, battery drainage, and inconvenience caused by faulty interior lighting and door lock issues.
7. How much does it typically cost to repair the Driver Door Ajar Input Circuit High problem in a Dodge at a dealership or auto repair shop?
- The repair costs can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor at a dealership or auto repair shop.
8. Are there any recalls or technical service bulletins related to the B1811 code for Dodge vehicles?
- It is recommended to check with the Dodge dealership or manufacturer for any recalls or technical service bulletins related to the Driver Door Ajar Input Circuit High problem in your specific vehicle model.
9. Will resetting the OBDII code B1811 on my Dodge temporarily fix the issue, or is a proper repair necessary?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the Driver Door Ajar Input Circuit High problem. A proper repair is necessary.
10. Can a DIY enthusiast with basic automotive knowledge and tools fix the B1811 code related to the Driver Door Ajar Input Circuit High in a Dodge?
- Depending on the specific cause of the issue, a DIY enthusiast with basic skills may be able to diagnose and repair the problem by following proper troubleshooting steps and using a service manual for guidance.
Discuss the causes and fixes for B1811 Dodge OBDII Code
Code B1811 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
