B1811 Chrysler Code - Driver Door Ajar Input Circuit High
Quick Answer
The Powertrain Control Module (PCM) receives a message over the CAN BUS from the Body Control Module (BCM) that there is a fault with the Left Front Door Switch Assembly. Common causes include Faulty Left Front Door Latch Assembly, Left Front Door Latch Assembly harness is open or shorted, Left Front Door Latch Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1811 Chrysler indicates Driver Door Ajar Input Circuit High.
- Common causes
- Common causes include Faulty Left Front Door Latch Assembly, Left Front Door Latch Assembly harness is open or shorted, Left Front Door Latch Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1811 Chrysler Description
What are the Possible Causes of the DTC B1811 Chrysler?
- Faulty Left Front Door Latch Assembly
- Left Front Door Latch Assembly harness is open or shorted
- Left Front Door Latch Assembly circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B1811 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1811 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1811 Chrysler code?
Need more information on how to fix the B1811 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1811 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1811 Chrysler Code
1. What are the common symptoms of OBDII code B1811 Chrysler (Driver Door Ajar Input Circuit High)?
- Common symptoms include the door ajar warning light staying illuminated, interior lights not turning off, and possible issues with power door locks.
2. What are the possible causes of the Driver Door Ajar Input Circuit High code B1811 in a Chrysler vehicle?
- Possible causes may include a faulty door ajar switch, damaged wiring or connectors in the door circuit, or a malfunctioning body control module.
3. How can I diagnose the issue causing OBDII code B1811 in my Chrysler related to the driver door ajar input circuit?
- You can start by visually inspecting the wiring and connectors for any damage, testing the door ajar switch for continuity, and using a scan tool to monitor the door ajar input signal.
4. Can I continue driving my Chrysler with the B1811 code related to the driver door ajar input circuit high?
- It is not recommended to ignore this issue, as it may lead to draining the battery due to lights staying on or potentially affect the vehicle's security system.
5. Are there any simple repair tips for fixing the Driver Door Ajar Input Circuit High code B1811 in a Chrysler?
- You can try cleaning and lubricating the door ajar switch, checking and repairing any damaged wiring, and resetting the body control module to see if the issue resolves.
6. How much does it typically cost to repair the B1811 code related to the driver door ajar input circuit in a Chrysler?
- Repair costs can vary depending on the exact cause of the issue, but it may range from a simple DIY fix to a few hundred dollars if professional diagnosis and repair are needed.
7. Can a DIY enthusiast with basic automotive knowledge fix the B1811 code in a Chrysler themselves?
- Yes, if you have basic automotive knowledge and the necessary tools, you may be able to diagnose and repair the driver door ajar input circuit issue causing the B1811 code yourself.
8. Will resetting the OBDII system clear the B1811 code related to the driver door ajar input circuit high in my Chrysler?
- Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to return after driving the vehicle.
9. Is the B1811 code specific to Chrysler vehicles, or can it occur in other car makes and models?
- While the B1811 code is specific to Chrysler vehicles, similar issues related to a driver door ajar input circuit high can occur in other car makes and models with their own specific diagnostic trouble codes.
10. What are the potential safety implications of ignoring the B1811 code related to the driver door ajar input circuit in a Chrysler?
- Ignoring the B1811 code may compromise the vehicle's security features, lead to unnecessary battery drain, and pose a safety risk if interior lights fail to turn off while driving at night.
Discuss the causes and fixes for B1811 Chrysler OBDII Code
Code B1811 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
