B1803 Code - Short To Positive In Driver Side Squib Circuit
Quick Answer
The Driver Side Squib Circuit consists of the Center Airbag Sensor Assembly, the Spiral Cable, and the Steering Pad. Common causes include Instrument panel wire, Faulty Spiral cable, Faulty Steering Pad (Driver Side Squib). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1803 indicates Short To Positive In Driver Side Squib Circuit.
- Common causes
- Common causes include Instrument panel wire, Faulty Spiral cable, Faulty Steering Pad (Driver Side Squib).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1803 Description
What are the Possible Causes of the DTC B1803?
- Instrument panel wire
- Faulty Spiral cable
- Faulty Steering Pad (Driver Side Squib)
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1803?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1803 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1803 code?
Need more information on how to fix the B1803 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1803 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1803 Chrysler — Driver Door Lock/Unlock Switch Circuit Stuck Lock
- B1803 Dodge — Driver Door Lock/Unlock Switch Circuit Stuck Lock
- B1803 Jeep — Driver Door Lock/Unlock Switch Circuit Stuck Lock
- B1803 Lexus — Short To Positive In Driver Side Squib Circuit
- B1803 RAM — Driver Door Lock/Unlock Switch Circuit Stuck Lock
- B1803 Scion — Short To Positive In Driver Side Squib Circuit
- B1803 Toyota — Short To Positive In Driver Side Squib Circuit
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1803 Code
No Frequently Asked Questions about B1803 Code found.
Discuss the causes and fixes for B1803 OBDII Code
-
Saya habis scanner mobil avanza veloz thn 2013...tapi ada sebua kode yg menunjukan kerusan dgn kode B1803 (61,8,98,3) dgn bhasa please refer to the relevant manual...mksd nya apa kode itu tlng di bantu
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
