B1776 Scion Code - Seat Belt Tension Sensor Power Source Circuit Malfunction
Quick Answer
The Seat Belt Tension Sensor Circuit consists of the Occupant Classification ECU and the Seat Belt Tension Sensor. Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Seat Belt Tension Sensor), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1776 Scion indicates Seat Belt Tension Sensor Power Source Circuit Malfunction.
- Common causes
- Common causes include Faulty Front Seat Outer Belt Assembly Right (RH) (Seat Belt Tension Sensor), Front Seat Outer Belt Assembly Right harness is open or shorted, Front Seat Outer Belt Assembly Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1776 Scion Description
What are the Possible Causes of the DTC B1776 Scion?
- Faulty Front Seat Outer Belt Assembly Right (RH) (Seat Belt Tension Sensor)
- Front Seat Outer Belt Assembly Right harness is open or shorted
- Front Seat Outer Belt Assembly Right circuit poor electrical connection
- Faulty Occupant Classification ECU
How to Fix the DTC B1776 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1776 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1776 Scion code?
Need more information on how to fix the B1776 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1776 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1776 Scion Code
1. What does the OBDII code B1776 mean for a Scion?
B1776 indicates a Seat Belt Tension Sensor Power Source Circuit Malfunction, meaning there's an issue with the electrical circuit powering the seat belt tension sensor.
2. What are the common symptoms of a B1776 code in a Scion?
Symptoms may include an illuminated airbag warning light, seat belt pretensioners not functioning properly, or the seat belt system failing safety diagnostics.
3. What causes the B1776 code to appear?
Common causes include damaged or corroded wiring, a faulty seat belt tension sensor, a blown fuse, or a malfunction in the airbag control module.
4. Can I still drive my Scion with a B1776 code?
While the vehicle can still be driven, the seat belt system may not provide proper safety protection in an accident, so repairs should be prioritized.
5. How do I diagnose the B1776 code in a Scion?
Start by using an OBDII scanner to confirm the code, then inspect the wiring and connectors for damage, test the seat belt tension sensor, and check for blown fuses.
6. How can I fix the B1776 code in my Scion?
Repairs may include replacing damaged wiring, repairing or replacing the seat belt tension sensor, or addressing issues with the airbag control module.
7. Does clearing the B1776 code solve the issue?
Clearing the code with a scanner may turn off the warning light temporarily, but the underlying problem must be fixed to prevent the code from reappearing.
8. How much does it cost to fix a B1776 code in a Scion?
Repair costs can vary, but diagnosing and fixing wiring issues may cost $100-$300, while replacing a seat belt tension sensor can cost $200-$500 or more, depending on labor rates.
9. Can a B1776 code cause the airbags to malfunction?
Yes, this code can be related to the airbag system, and it may prevent the airbags from deploying correctly in an accident.
10. Is the B1776 code specific to Scion vehicles?
While the code is not exclusive to Scion, it refers to a seat belt tension sensor issue in vehicles equipped with similar systems, and the exact diagnosis process may vary by manufacturer.
Discuss the causes and fixes for B1776 Scion OBDII Code
Code B1776 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
