B1735 2014 GMC Sierra Code - Driver Seat Front Up Switch Circuit
Quick Answer
The Seat Memory Control Module supplies a reference voltage to each signal circuit of the Driver Seat Adjuster Switch. Common causes include Faulty Driver Seat Adjuster Switch, Driver Seat Adjuster Switch harness is open or shorted, Driver Seat Adjuster Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1735 2014 GMC Sierra indicates Driver Seat Front Up Switch Circuit.
- Common causes
- Common causes include Faulty Driver Seat Adjuster Switch, Driver Seat Adjuster Switch harness is open or shorted, Driver Seat Adjuster Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1735 2014 GMC Sierra Description
What are the Possible Causes of the DTC B1735 2014 GMC Sierra?
- Faulty Driver Seat Adjuster Switch
- Driver Seat Adjuster Switch harness is open or shorted
- Driver Seat Adjuster Switch circuit poor electrical connection
- Faulty Seat Memory Control Module
How to Fix the DTC B1735 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1735 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1735 2014 GMC Sierra code?
Need more information on how to fix the B1735 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1735 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1735 2014 GMC Sierra Code
1. What does the OBDII code B1735 indicate on a 2014 GMC Sierra?
The B1735 code indicates a fault in the "Driver Seat Front Up Switch Circuit," suggesting an issue with the electrical circuit associated with the driver seat’s front upward adjustment switch.
2. What are common symptoms of code B1735 in a 2014 GMC Sierra?
Symptoms might include the driver's seat not adjusting upward from the front, erratic movement of the seat when attempting to adjust the front upward position, or no response when the front up switch is activated.
3. What could cause the B1735 code to appear on a 2014 GMC Sierra?
Possible causes include a faulty driver seat front up switch, damaged wiring or connectors in the seat adjustment circuit, a blown fuse, or a malfunction in the seat control module.
4. How can I diagnose the problem causing the B1735 code in my 2014 GMC Sierra?
Diagnosis should begin with a visual inspection of the switch, wiring, and connectors for any signs of damage or disconnection. Using a multimeter, check for continuity and proper voltage in the switch circuit. Additionally, scanning the vehicle with an OBDII scanner can help confirm the issue and check for other related codes.
5. What steps should be taken to repair the B1735 code on a 2014 GMC Sierra?
Repair steps may include replacing the faulty driver seat front up switch, repairing or replacing damaged wires or connectors, checking and replacing any blown fuses, or reprogramming or replacing the seat control module if necessary.
6. Is it safe to drive my 2014 GMC Sierra with the B1735 code active?
While it may be safe to drive, the functionality of adjusting the driver’s seat may be impaired, which can affect driving comfort and ergonomics. It is advisable to address the issue promptly to ensure all seat adjustments are functioning correctly for safe vehicle operation.
7. Can ignoring the B1735 code lead to further vehicle issues?
Yes, ignoring the B1735 code can potentially lead to further issues, especially if related to a broader problem in the electrical system or seat control module. It’s best to resolve the issue to avoid additional electrical faults or failures in seat functionality.
8. How much does it typically cost to fix the B1735 code in a 2014 GMC Sierra?
The cost can vary widely depending on the specific repair needed. Replacing a switch might cost anywhere from $50 to $150 for parts and labor, while more extensive electrical repairs or module replacement can increase the cost significantly.
9. Are there any preventive measures to avoid the B1735 code in the future?
Preventive measures include regular maintenance checks of the vehicle’s electrical system, ensuring that seat adjustment mechanisms are clean and free from obstructions, and avoiding excessive force on switches which can lead to premature wear or failure.
Discuss the causes and fixes for B1735 2014 GMC Sierra OBDII Code
Code B1735 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
