AutoCodes – KIA – B1730 KIA

B1730 KIA Code - Anchor Pretensioner Front-Driver Resistance Too High

Quick Answer

Driver Anchor Pretensioner operates as well as Belt Pretensioner at the same time it gets into its deploy condition after a collision. Common causes include Faulty Anchor Pretensioner Front-Driver, Anchor Pretensioner Front-Driver harness is open or shorted, Anchor Pretensioner Front-Driver circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1730 KIA indicates Anchor Pretensioner Front-Driver Resistance Too High.
Common causes: Common causes include Faulty Anchor Pretensioner Front-Driver, Anchor Pretensioner Front-Driver harness is open or shorted, Anchor Pretensioner Front-Driver circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,754

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1730 KIA Description

Driver Anchor Pretensioner operates as well as Belt Pretensioner at the same time it gets into its deploy condition after a collision. It is located at near anchor on the driver seat and it is an equipment to make up for the existing short stroke. The Driver Anchor Pretensioner is supported by two cables and it is an auxiliary equipment to prevent a driver from breaking away doubly as the seat belt is being pulled toward anchor side after a collision.

OBDII Code B1730 KIA - Anchor Pretensioner Front-Driver Resistance Too High - AutoCodes.com — B1730 KIA Code - Anchor Pretensioner Front-Driver Resistance Too High

What does this mean?

What are the Possible Causes of the DTC B1730 KIA?

Faulty Anchor Pretensioner Front-Driver
Anchor Pretensioner Front-Driver harness is open or shorted
Anchor Pretensioner Front-Driver circuit poor electrical connection
Faulty Supplemental Restraints System Control Module (SRSCM)

How to Fix the DTC B1730 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1730 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1730 KIA code?

Need more information on how to fix the B1730 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1730 KIA code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1730 KIA Code

1. What are the common symptoms of OBDII code B1730 in a KIA related to the Anchor Pretensioner Front-Driver Resistance Too High?

- The common symptoms include the airbag warning light illuminating on the dashboard and a possible message indicating an issue with the anchor pretensioner front-driver resistance.

2. What are the potential causes of OBDII code B1730 in a KIA?

- The code B1730 typically indicates a high resistance in the anchor pretensioner circuit, which could be caused by a faulty pretensioner, damaged wiring, or poor electrical connections.

3. How serious is the OBDII code B1730 related to Anchor Pretensioner Front-Driver Resistance Too High in a KIA?

- This code is related to the safety system of the vehicle, specifically the driver's seatbelt pretensioner. It is crucial to address this issue promptly to ensure the proper functioning of the safety systems in case of an accident.

4. Can I continue driving my KIA with OBDII code B1730 present?

- It is not recommended to drive the vehicle with the airbag warning light on, as it indicates a potential issue with the safety systems. It is advisable to address the problem as soon as possible.

5. How can I diagnose and repair OBDII code B1730 in my KIA?

- Diagnosing the issue involves checking the pretensioner, inspecting the wiring for any damage, and testing the electrical connections. Repairing the problem may involve replacing the faulty pretensioner or repairing the wiring as needed.

6. Is it possible to reset the OBDII code B1730 in a KIA without fixing the underlying issue?

- While you can clear the code temporarily, the underlying problem causing the high resistance in the anchor pretensioner circuit will persist. It is essential to address the root cause to prevent the code from reoccurring.

7. Are there any safety risks associated with OBDII code B1730 in a KIA?

- Yes, there are potential safety risks as the code relates to the driver's seatbelt pretensioner, which is a crucial component of the vehicle's safety system. Driving with a malfunctioning pretensioner can compromise your safety in the event of a collision.

8. How much does it typically cost to repair OBDII code B1730 in a KIA?

- The cost of repairing OBDII code B1730 can vary depending on the specific issue and the labor rates in your area. It may involve the cost of replacing the pretensioner, repairing wiring, and diagnostic fees.

9. Can a DIY enthusiast fix OBDII code B1730 in a KIA?

- While some DIY enthusiasts may have the skills to diagnose and repair basic electrical issues, dealing with safety components like the pretensioner is best left to professionals. It is recommended to seek assistance from a qualified mechanic.

10. How can I prevent OBDII code B1730 from occurring in my KIA?

- To prevent OBDII code B1730, it is essential to ensure regular maintenance of the vehicle's safety systems, including inspecting the seatbelt pretensioners during routine checks and addressing any warning lights promptly.