B1694 Scion Code - Side Satellite Sensor 2 Bus RH Initialization Incomplete
Quick Answer
The Rear Floor Airbag Sensor circuit consists of the Center Airbag Sensor and Rear Floor Airbag Sensor. Common causes include Faulty Rear Floor Airbag Sensor, Rear Floor Airbag Sensor harness is open or shorted, Rear Floor Airbag Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1694 Scion indicates Side Satellite Sensor 2 Bus RH Initialization Incomplete.
- Common causes
- Common causes include Faulty Rear Floor Airbag Sensor, Rear Floor Airbag Sensor harness is open or shorted, Rear Floor Airbag Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1694 Scion Description
What are the Possible Causes of the DTC B1694 Scion?
- Faulty Rear Floor Airbag Sensor
- Rear Floor Airbag Sensor harness is open or shorted
- Rear Floor Airbag Sensor circuit poor electrical connection
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1694 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1694 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1694 Scion code?
Need more information on how to fix the B1694 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1694 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1694 Scion Code
What are common symptoms of OBDII code B1694 Scion (Side Satellite Sensor 2 Bus RH Initialization Incomplete)?
- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the side airbag system.
What can cause the OBDII code B1694 Scion to trigger?
- This code can be triggered by a fault in the side satellite sensor 2 bus RH, indicating that the initialization process for this sensor was incomplete.
How serious is the OBDII code B1694 Scion?
- This code is related to the side airbag system, so it should be taken seriously. It can affect the proper functioning of the airbags in the event of a collision.
What should I do if I get the OBDII code B1694 Scion?
- It is recommended to have the vehicle inspected by a qualified technician to diagnose the exact cause of the issue and determine the necessary repairs.
Can I continue driving with the OBDII code B1694 Scion active?
- It is not recommended to continue driving with this code active, as it indicates a potential problem with the side airbag system that could affect its functionality in an accident.
How can the OBDII code B1694 Scion be repaired?
- Repairing this code typically involves diagnosing and fixing the underlying issue with the side satellite sensor 2 bus RH to complete the initialization process.
Is it possible to reset the OBDII code B1694 Scion without repairs?
- Simply clearing the code without addressing the underlying issue is not recommended, as the problem may persist and potentially compromise the safety of the airbag system.
Can weather conditions affect the OBDII code B1694 Scion?
- Extreme weather conditions or environmental factors are not typically the primary cause of this code. It is more likely related to a sensor or system malfunction.
Are there any DIY repair tips for the OBDII code B1694 Scion?
- Due to the safety implications of this code, it is best to leave the diagnosis and repair to a professional technician with the necessary tools and expertise.
Discuss the causes and fixes for B1694 Scion OBDII Code
Code B1694 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
