B1693 Scion Code - Door Side Airbag Sensor Right Initialization Incomplete
Quick Answer
The Side Collision Sensor Right (RH) circuit is composed of the Center Airbag Sensor Assembly, Side Airbag Sensor Right, and Rear Airbag Sensor Right. Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1693 Scion indicates Door Side Airbag Sensor Right Initialization Incomplete.
- Common causes
- Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1693 Scion Description
What are the Possible Causes of the DTC B1693 Scion?
- Faulty Side Airbag Sensor Right (RH)
- Side Airbag Sensor Right harness is open or shorted
- Side Airbag Sensor Right circuit poor electrical connection
- Faulty Rear Airbag Sensor Right (RH)
- Faulty Center Airbag Sensor Assembly
How to Fix the DTC B1693 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1693 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1693 Scion code?
Need more information on how to fix the B1693 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1693 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1693 Scion Code
1. What does the OBDII code B1693 mean for a Scion?
Code B1693 indicates that the right-side door airbag sensor's initialization process is incomplete or has failed.
2. What are the symptoms of code B1693 in a Scion?
Common symptoms include the airbag warning light illuminating on the dashboard and the airbag system potentially being disabled on the affected side.
3. What causes the B1693 code to appear?
This code is typically caused by an incomplete or failed initialization of the right-side door airbag sensor, often due to a faulty sensor, wiring issues, or improper programming.
4. Can I still drive my Scion with the B1693 code active?
While the vehicle can still be driven, the airbag system may not function correctly in the event of a collision, posing a safety risk.
5. How can I fix the B1693 code in my Scion?
The issue can often be resolved by reinitializing the airbag sensor using a compatible scan tool or by replacing the sensor if it is faulty.
6. Do I need a professional to fix the B1693 code?
If you have access to the proper diagnostic tools and experience with airbag systems, you may attempt the repair. Otherwise, it’s recommended to consult a qualified technician due to the complexity of airbag systems.
7. Could a dead battery trigger the B1693 code?
Yes, a dead or disconnected battery can interrupt the airbag sensor's initialization process, potentially triggering this code.
8. How much does it cost to repair the B1693 code?
The cost varies depending on the root cause, but replacing the airbag sensor can cost $100–$300 for the part, plus labor if done professionally.
9. Will clearing the code fix the B1693 issue?
Clearing the code without addressing the underlying issue will not fix the problem, and the code is likely to return.
10. Can a wiring problem cause the B1693 code?
Yes, damaged or corroded wiring to the right-side door airbag sensor can prevent proper initialization and trigger the code.
Discuss the causes and fixes for B1693 Scion OBDII Code
Code B1693 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
