AutoCodes – Toyota – B1692 2014 Toyota RAV4

B1692 2014 Toyota RAV4 Code - Lost Communication with Door Side Airbag Sensor Right

Quick Answer

The circuit for the Side Collision Sensor Right (RH) is composed of the Center Airbag Sensor, Side Airbag Sensor Right, and Rear Airbag Sensor Right. Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1692 2014 Toyota RAV4 indicates Lost Communication with Door Side Airbag Sensor Right.
Common causes: Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 256

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 13, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1692 2014 Toyota RAV4 Description

The circuit for the Side Collision Sensor Right (RH) is composed of the Center Airbag Sensor, Side Airbag Sensor Right, and Rear Airbag Sensor Right. The Side Airbag Sensor Right and Rear Airbag Sensor Right detect impacts to the vehicle and send signals to the Center Airbag Sensor to determine if the airbag should be deployed. The Diagnostic Trouble Code (DTC) B1692 is stored when a malfunction is detected in the circuit for the Side Collision Sensor Right (to determine deployment of the front seat side airbag Right, rear seat side airbag Right, and curtain shield airbag Right).

OBDII Code B1692 2014 Toyota RAV4 - Lost Communication with Door Side Airbag Sensor Right - AutoCodes.com — B1692 2014 Toyota RAV4 Code - Lost Communication with Door Side Airbag Sensor Right

What does this mean?

What are the Possible Causes of the DTC B1692 2014 Toyota RAV4?

Faulty Side Airbag Sensor Right (RH)
Side Airbag Sensor Right harness is open or shorted
Side Airbag Sensor Right circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1692 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1692 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1692 2014 Toyota RAV4 code?

Need more information on how to fix the B1692 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1692 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1692 2014 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B1692 in a 2014 Toyota RAV4?

The common symptoms include the airbag warning light illuminating on the dashboard and potential loss of communication with the right door side airbag sensor.

2. What does the OBDII code B1692 "Lost Communication with Door Side Airbag Sensor Right" mean in a 2014 Toyota RAV4?

This code indicates that there is a communication problem between the vehicle's onboard diagnostic system and the right door side airbag sensor.

3. What are the possible causes of OBDII code B1692 in a 2014 Toyota RAV4?

Possible causes include loose or damaged wiring connections, a faulty door side airbag sensor, a blown fuse, or a malfunctioning airbag control module.

4. How can I diagnose the issue related to OBDII code B1692 in my 2014 Toyota RAV4?

Diagnosis typically involves checking the wiring connections, inspecting the door side airbag sensor, testing the fuses, and using a diagnostic scan tool to communicate with the airbag system.

5. Can I continue driving my 2014 Toyota RAV4 with the OBDII code B1692 present?

It is not recommended to drive the vehicle with the airbag warning light on, as it indicates a potential issue with the airbag system, which is crucial for occupant safety in the event of a collision.

6. How can I repair OBDII code B1692 in my 2014 Toyota RAV4?

Repairing the issue may involve repairing or replacing damaged wiring, replacing the right door side airbag sensor, checking and replacing blown fuses, or recalibrating the airbag control module.

7. Do I need special tools to fix OBDII code B1692 in a 2014 Toyota RAV4?

While basic tools like a multimeter and socket set may be useful for diagnosing and repairing the issue, specialized tools like a diagnostic scan tool capable of communicating with the airbag system may be necessary for a thorough diagnosis.

8. How much does it typically cost to repair OBDII code B1692 in a 2014 Toyota RAV4?

The cost of repair can vary depending on the specific issue causing the code, the labor rates of the repair shop, and the cost of any replacement parts needed. It's recommended to obtain quotes from different repair shops for an accurate estimate.

9. Is it safe to reset the OBDII code B1692 in a 2014 Toyota RAV4 without fixing the underlying issue?

Resetting the code without addressing the root cause can temporarily turn off the warning light, but the issue will likely reappear, and the airbag system may not function properly in the event of an accident.

10. Can a DIY enthusiast with some automotive experience fix OBDII code B1692 in a 2014 Toyota RAV4?

While some basic troubleshooting and repairs can be done by a DIY enthusiast, working on the airbag system requires precision and knowledge of safety protocols. It's recommended to consult a professional or experienced technician for airbag system issues.