AutoCodes – Generic – B1692

B1692 Code - Lost Communication with Door Side Airbag Sensor Right

Quick Answer

The circuit for the Side Collision Sensor Right (RH) is composed of the Center Airbag Sensor, Side Airbag Sensor Right, and Rear Airbag Sensor Right. Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1692 indicates Lost Communication with Door Side Airbag Sensor Right.
Common causes: Common causes include Faulty Side Airbag Sensor Right (RH), Side Airbag Sensor Right harness is open or shorted, Side Airbag Sensor Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,962

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 13, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1692 Description

The circuit for the Side Collision Sensor Right (RH) is composed of the Center Airbag Sensor, Side Airbag Sensor Right, and Rear Airbag Sensor Right. The Side Airbag Sensor Right and Rear Airbag Sensor Right detect impacts to the vehicle and send signals to the Center Airbag Sensor to determine if the airbag should be deployed. The Diagnostic Trouble Code (DTC) B1692 is stored when a malfunction is detected in the circuit for the Side Collision Sensor Right (to determine deployment of the front seat side airbag Right, rear seat side airbag Right, and curtain shield airbag Right).

OBDII Code B1692 - Lost Communication with Door Side Airbag Sensor Right - AutoCodes.com — B1692 Code - Lost Communication with Door Side Airbag Sensor Right

What does this mean?

What are the Possible Causes of the DTC B1692?

Faulty Side Airbag Sensor Right (RH)
Side Airbag Sensor Right harness is open or shorted
Side Airbag Sensor Right circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1692?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1692 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1692 code?

Need more information on how to fix the B1692 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1692 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1692 Ford — Autolamp Delay Circuit Short To Ground
B1692 Lexus — Lost Communication with Door Side Airbag Sensor Right
B1692 Lincoln — Autolamp Delay Circuit Short To Ground
B1692 Mercury — Autolamp Delay Circuit Short To Ground
B1692 Scion — Lost Communication with Door Side Airbag Sensor Right
B1692 Toyota — Lost Communication with Door Side Airbag Sensor Right

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1692 Code

1. What are the common symptoms of OBDII code B1692 - Lost Communication with Door Side Airbag Sensor Right?

- The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the door side airbag on the right side of the vehicle.

2. What are the possible causes of OBDII code B1692?

- The code B1692 can be triggered by a faulty door side airbag sensor on the right side, damaged wiring or connectors, or communication errors within the airbag system.

3. How can I diagnose the cause of OBDII code B1692?

- To diagnose the issue, you may need to perform a thorough inspection of the door side airbag sensor, check the wiring and connectors for damage, and use an OBDII scanner to retrieve specific error codes.

4. Is it safe to drive with OBDII code B1692 active?

- It is not recommended to drive with the code B1692 active, as it indicates a potential problem with the airbag system's communication on the right side, which could compromise safety in the event of an accident.

5. How can I repair OBDII code B1692?

- Repairing the code B1692 may involve replacing the faulty door side airbag sensor on the right side, repairing or replacing damaged wiring and connectors, and clearing the error codes with an OBDII scanner.

6. Can OBDII code B1692 be reset without fixing the underlying issue?

- While you can reset the code temporarily, it is crucial to address the underlying issue causing code B1692 to prevent it from reoccurring and ensure the proper functioning of the airbag system.

7. Are there any safety precautions to consider when dealing with OBDII code B1692?

- When working on the airbag system or related components, always disconnect the vehicle's battery, follow proper safety procedures, and consider consulting a professional if you are not experienced with airbag systems.

8. How do I prevent OBDII code B1692 from occurring again in the future?

- To prevent the recurrence of code B1692, regularly inspect the airbag system components, ensure proper wiring connections, and address any issues promptly to maintain the system's integrity.

9. Can a DIY enthusiast fix OBDII code B1692, or should I seek professional help?

- Depending on your experience and knowledge of automotive repairs, you may be able to address code B1692 yourself by following proper diagnostic procedures and repair guidelines. However, if you are unsure, it is advisable to seek professional help.

10. How long does it typically take to repair OBDII code B1692?

- The repair time for code B1692 can vary depending on the specific cause of the issue, the availability of replacement parts, and your level of experience. It may range from a few hours to a day, especially if wiring repairs or sensor replacement are required.