AutoCodes – Scion – B1648 Scion

B1648 Scion Code - Side Satellite Sensor Bus Left Initialization Incomplete

Quick Answer

The Side Collision Sensor Left (LH) circuit (to determine deployment of the Front Seat Side Airbag Assembly LH and Curtain Shield Airbag Assembly LH) is composed of the Center Airbag Sensor Assembly, Side Airbag Sensor LH and Rear Airbag Sensor LH. Common causes include Faulty Side Airbag Sensor Left (LH), Faulty Rear Airbag Sensor Left (LH), Faulty Center Airbag Sensor Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1648 Scion indicates Side Satellite Sensor Bus Left Initialization Incomplete.
Common causes: Common causes include Faulty Side Airbag Sensor Left (LH), Faulty Rear Airbag Sensor Left (LH), Faulty Center Airbag Sensor Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,138

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 24, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1648 Scion Description

The Side Collision Sensor Left (LH) circuit (to determine deployment of the Front Seat Side Airbag Assembly LH and Curtain Shield Airbag Assembly LH) is composed of the Center Airbag Sensor Assembly, Side Airbag Sensor LH and Rear Airbag Sensor LH. The Side Airbag Sensor LH and Rear Airbag Sensor LH detect impacts to the vehicle and send signals to the Center Airbag Sensor Assembly to determine if the airbag should be deployed. The Diagnostic Trouble Code (DTC) is stored when a malfunction is detected in the Side Collision Sensor LH circuit (to determine deployment of the Front Seat Side Airbag Assembly LH and Curtain Shield Airbag Assembly LH).

OBDII Code B1648 Scion - Side Satellite Sensor Bus Left Initialization Incomplete - AutoCodes.com — B1648 Scion Code - Side Satellite Sensor Bus Left Initialization Incomplete

What does this mean?

What are the Possible Causes of the DTC B1648 Scion?

Faulty Side Airbag Sensor Left (LH)
Faulty Rear Airbag Sensor Left (LH)
Faulty Center Airbag Sensor Assembly
Center Airbag Sensor Assembly harness is open or shorted
Center Airbag Sensor Assembly circuit poor electrical connection

How to Fix the DTC B1648 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1648 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1648 Scion code?

Need more information on how to fix the B1648 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1648 Scion code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1648 Scion Code

1. What are the common symptoms of OBDII code B1648 in a Scion related to the Side Satellite Sensor Bus Left Initialization Incomplete?

- Common symptoms include airbag warning light illuminated on the dashboard, potential non-deployment of side airbags, and diagnostic trouble codes related to the side satellite sensor system.

2. What are the possible causes of the Side Satellite Sensor Bus Left Initialization Incomplete code (B1648) in a Scion?

- Possible causes may include a faulty side satellite sensor, wiring issues, poor electrical connections, or a malfunction in the airbag control module.

3. How can I diagnose the Side Satellite Sensor Bus Left Initialization Incomplete code (B1648) in my Scion?

- Diagnosis typically involves using an OBDII scanner to retrieve the specific code, checking for other related trouble codes, inspecting the side satellite sensor and related wiring, and performing a thorough visual inspection.

4. Is it safe to drive my Scion with the Side Satellite Sensor Bus Left Initialization Incomplete code (B1648) illuminated?

- It is recommended to address the issue promptly to ensure the proper functioning of the side airbag system in the event of a collision. It is advisable to have the system inspected by a qualified technician.

5. Can I reset the OBDII code B1648 related to the Side Satellite Sensor Bus Left Initialization Incomplete in my Scion?

- Simply clearing the code without addressing the underlying issue is not recommended. The root cause of the code should be diagnosed and repaired to ensure the safety and proper functioning of the side airbag system.

6. Are there any DIY repair tips for resolving the Side Satellite Sensor Bus Left Initialization Incomplete code (B1648) in a Scion?

- DIY repair may involve checking and securing the wiring connections related to the side satellite sensor, ensuring proper sensor alignment, and verifying the power supply to the sensor.

7. How much does it typically cost to repair the Side Satellite Sensor Bus Left Initialization Incomplete code (B1648) in a Scion?

- Repair costs can vary depending on the exact cause of the issue. It is advisable to consult with a professional technician for an accurate diagnosis and cost estimate.

8. Can a faulty side satellite sensor cause the Side Satellite Sensor Bus Left Initialization Incomplete code (B1648) in a Scion?

- Yes, a malfunctioning side satellite sensor can trigger the code B1648 due to initialization issues or communication errors within the side airbag system.

9. What are the potential risks of ignoring the Side Satellite Sensor Bus Left Initialization Incomplete code (B1648) in a Scion?

- Ignoring the code may result in the side airbags not deploying properly in the event of a collision, potentially compromising occupant safety. It is crucial to address the issue promptly.

10. How long does it typically take to repair the Side Satellite Sensor Bus Left Initialization Incomplete code (B1648) in a Scion?

- The repair time can vary depending on the complexity of the issue and the availability of parts. It is advisable to consult with a qualified technician for an accurate estimate of repair time.