B1648 Jeep Code - Rear Right Turn Control Circuit High
Quick Answer
The Total Integrated Power Module (TIPM) monitors the Rear Right Turn Control. Common causes include Faulty Rear Right Turn Signal Lamp, Rear Right Turn Signal Lamp harness is open or shorted, Rear Right Turn Signal Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1648 Jeep indicates Rear Right Turn Control Circuit High.
- Common causes
- Common causes include Faulty Rear Right Turn Signal Lamp, Rear Right Turn Signal Lamp harness is open or shorted, Rear Right Turn Signal Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1648 Jeep Description
What are the Possible Causes of the DTC B1648 Jeep?
- Faulty Rear Right Turn Signal Lamp
- Rear Right Turn Signal Lamp harness is open or shorted
- Rear Right Turn Signal Lamp circuit poor electrical connection
- Faulty Total Integrated Power Module (TIPM)
How to Fix the DTC B1648 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1648 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1648 Jeep code?
Need more information on how to fix the B1648 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1648 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1648 Jeep Code
1. What are the common symptoms of OBDII code B1648 in a Jeep related to the Rear Right Turn Control Circuit High?
- The common symptoms include the right rear turn signal not working, fast blinking of the turn signal, or the turn signal staying on without flashing.
2. What are the possible causes of the OBDII code B1648 in a Jeep?
- The code B1648 indicating a Rear Right Turn Control Circuit High in a Jeep can be caused by issues such as a faulty turn signal bulb, a damaged wiring harness, or a malfunctioning turn signal switch.
3. How can I diagnose the OBDII code B1648 in my Jeep?
- To diagnose the code B1648, you can start by visually inspecting the right rear turn signal bulb and the wiring harness for any visible damage. You can also use a multimeter to check for continuity and voltage along the circuit.
4. Is it safe to continue driving my Jeep with the OBDII code B1648 indicating an issue with the Rear Right Turn Control Circuit High?
- It is not recommended to drive your Jeep with the B1648 code unresolved, as it can affect the visibility of your turn signals to other drivers, potentially leading to unsafe driving conditions.
5. Can I repair the OBDII code B1648 in my Jeep by simply replacing the turn signal bulb?
- In some cases, replacing the right rear turn signal bulb can resolve the B1648 code. However, if the issue persists after bulb replacement, further diagnosis of the wiring and components may be necessary.
6. Are there any DIY tips for fixing the OBDII code B1648 related to the Rear Right Turn Control Circuit High in a Jeep?
- DIY tips for addressing the B1648 code include checking and replacing the turn signal bulb, inspecting and repairing any damaged wiring, and ensuring proper connections at the turn signal switch.
7. How much does it typically cost to repair the OBDII code B1648 in a Jeep at a professional auto repair shop?
- The cost of repairing the B1648 code can vary depending on the exact cause of the issue. On average, the repair cost at a professional auto repair shop can range from $100 to $300, including parts and labor.
8. Can a loose connection in the turn signal wiring cause the OBDII code B1648 in a Jeep?
- Yes, a loose or poor connection in the turn signal wiring, particularly in the right rear circuit, can trigger the B1648 code indicating a Rear Right Turn Control Circuit High in a Jeep.
9. Will resetting the OBDII system clear the B1648 code in my Jeep temporarily?
- Resetting the OBDII system may temporarily clear the B1648 code, but if the underlying issue with the Rear Right Turn Control Circuit High is not addressed, the code is likely to reappear upon driving the vehicle.
10. Can extreme weather conditions, such as heavy rain or snow, contribute to triggering the OBDII code B1648 in a Jeep?
- Yes, extreme weather conditions can potentially exacerbate existing issues with the turn signal circuitry in a Jeep, leading to the triggering of the B1648 code related to the Rear Right Turn Control Circuit High.
Discuss the causes and fixes for B1648 Jeep OBDII Code
Code B1648 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
