B1626 Jeep Code - Cargo Lamp Control Circuit Short To Ground
Quick Answer
The Body Control Module (BCM) monitors Cargo Lamp Control. Common causes include Faulty Cargo Lamp, Cargo Lamp harness is open or shorted, Cargo Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1626 Jeep indicates Cargo Lamp Control Circuit Short To Ground.
- Common causes
- Common causes include Faulty Cargo Lamp, Cargo Lamp harness is open or shorted, Cargo Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1626 Jeep Description
What are the Possible Causes of the DTC B1626 Jeep?
- Faulty Cargo Lamp
- Cargo Lamp harness is open or shorted
- Cargo Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B1626 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1626 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1626 Jeep code?
Need more information on how to fix the B1626 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1626 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1626 Jeep Code
1. What does the OBDII code B1626 indicate in a Jeep?
The B1626 code in a Jeep indicates a fault in the cargo lamp control circuit, specifically a short to ground. This means there is an unintended connection between the cargo lamp circuit and the vehicle’s ground, disrupting normal operation.
2. What symptoms might I notice if my Jeep shows the B1626 code?
Symptoms of the B1626 code may include the cargo lamp not functioning properly or staying off entirely. In some cases, you might not notice any symptoms other than the illuminated check engine light.
3. What are common causes for the B1626 code in a Jeep?
Common causes for the B1626 code include damaged wiring, faulty cargo lamp switch, or a problem with the cargo lamp bulb or socket which is causing a short to ground.
4. How can I diagnose the B1626 code in my Jeep?
To diagnose the B1626 code, a technician will typically start by visually inspecting the cargo lamp wiring for signs of damage, wear, or corrosion. The inspection will also include checking the cargo lamp switch and the lamp itself. Using a multimeter, the technician can check for continuity in the circuit to confirm a short to ground.
5. What steps should be taken to fix the B1626 code in a Jeep?
To fix the B1626 code, any damaged wiring should be repaired or replaced. If the cargo lamp switch or the lamp itself is faulty, these components should be replaced. Ensure all connections are secure and that there are no remaining shorts in the circuit.
6. Is it safe to drive my Jeep with the B1626 code?
While it may be safe to drive with the B1626 code, as it primarily affects the cargo lamp, it is always best to address any electrical faults promptly. Ignoring the code could lead to further electrical system issues.
7. Can the B1626 code affect the battery life of my Jeep?
Yes, if the short to ground causes an electrical leak, it could potentially drain the battery. It is advisable to fix the issue to avoid any potential battery drain or further electrical complications.
8. Will the B1626 code clear itself once the issue is fixed, or do I need to manually reset it?
After the issue causing the B1626 code is resolved, the code will not automatically clear from the vehicle's ECU. A scan tool must be used to reset the system and clear the code.
9. How urgent is it to repair a B1626 code in a Jeep?
While the B1626 code is not as urgent as other fault codes affecting drivability or safety systems, it is important to address it to maintain the vehicle's electrical system integrity and prevent possible future issues.
Discuss the causes and fixes for B1626 Jeep OBDII Code
Code B1626 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
