AutoCodes – Generic – B1613

B1613 Code - Front Airbag Sensor Right Initialization Incomplete

Quick Answer

The Front Airbag Sensor Right circuit consists of the Center Airbag Sensor Assembly and Front Airbag Sensor Right. Common causes include Faulty Front Airbag Sensor Right, Front Airbag Sensor Right harness is open or shorted, Front Airbag Sensor Right circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1613 indicates Front Airbag Sensor Right Initialization Incomplete.
Common causes: Common causes include Faulty Front Airbag Sensor Right, Front Airbag Sensor Right harness is open or shorted, Front Airbag Sensor Right circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 18,011

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1613 Description

The Front Airbag Sensor Right circuit consists of the Center Airbag Sensor Assembly and Front Airbag Sensor Right. The Front Airbag Sensor Right detects impacts to the vehicle and sends signals to the Center Airbag Sensor Assembly to determine if the airbag should be deployed. The Diagnostic Trouble Code (DTC) is stored when a malfunction is detected in the Front Airbag Sensor Right circuit.

OBDII Code B1613 - Front Airbag Sensor Right Initialization Incomplete - AutoCodes.com — B1613 Code - Front Airbag Sensor Right Initialization Incomplete

What does this mean?

What are the Possible Causes of the DTC B1613?

Faulty Front Airbag Sensor Right
Front Airbag Sensor Right harness is open or shorted
Front Airbag Sensor Right circuit poor electrical connection
Faulty Center Airbag Sensor Assembly

How to Fix the DTC B1613?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1613 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1613 code?

Need more information on how to fix the B1613 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1613 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1613 Chrysler — Panel Illumination Control Circuit Low
B1613 Dodge — Panel Illumination Control Circuit Low
B1613 Jeep — Panel Illumination Control Circuit Low
B1613 Lexus — Front Airbag Sensor Right Initialization Incomplete
B1613 RAM — Panel Illumination Control Circuit Low
B1613 Scion — Front Airbag Sensor Right Initialization Incomplete
B1613 Toyota — Front Airbag Sensor Right Initialization Incomplete

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1613 Code

1. What are the common symptoms of OBDII code B1613 (Front Airbag Sensor Right Initialization Incomplete)?

- The common symptoms include the airbag warning light staying illuminated on the dashboard and a potential loss of functionality in the right front airbag system.

2. What are the possible causes of OBDII code B1613?

- The code B1613 can be triggered by issues such as a faulty front airbag sensor on the right side, damaged wiring or connectors, or a failed airbag control module.

3. How can I diagnose the cause of OBDII code B1613?

- Diagnosing the code typically involves using a professional OBDII scanner to retrieve the specific fault codes and then performing visual inspections of the sensor, wiring, and connectors for any signs of damage.

4. Can I drive my vehicle with OBDII code B1613 present?

- It is not recommended to drive the vehicle with the B1613 code active, as it indicates a potential issue with the right front airbag sensor that could compromise the safety of the airbag system.

5. How can I repair OBDII code B1613?

- Repairing the B1613 code often involves replacing the faulty front airbag sensor on the right side, repairing any damaged wiring or connectors, and clearing the trouble codes with a diagnostic scanner.

6. Are there any DIY tips for fixing OBDII code B1613?

- While some basic inspections and connector checks can be done by DIY enthusiasts, diagnosing and repairing the B1613 code may require specialized tools and expertise best handled by a professional mechanic.

7. Is it important to address OBDII code B1613 promptly?

- Yes, it is crucial to address the B1613 code promptly to ensure the proper functioning of the right front airbag system and maintain the overall safety of the vehicle in the event of a collision.

8. Can weather conditions affect OBDII code B1613?

- Extreme weather conditions or moisture exposure can potentially impact the sensors and wiring associated with the airbag system, leading to issues like the B1613 code.

9. Will disconnecting the battery reset OBDII code B1613?

- Disconnecting the battery may temporarily reset the code, but if the underlying issue causing the B1613 code is not addressed and repaired, the code is likely to reappear upon driving the vehicle.

10. How much does it typically cost to repair OBDII code B1613?

- The cost of repairing the B1613 code can vary depending on the specific cause of the issue, the parts needed for replacement, and the labor rates of the mechanic, but it is advisable to budget for potentially significant repair costs.