B1600 Ford Code - PATS Ignition Key Transponder Signal Is Not Received
Quick Answer
The Passive Anti-Theft System (PATS) transceiver communicates with the PATS key. Common causes include Faulty Passive Anti-Theft System (PATS) key, Faulty PATS transceiver, Faulty Powertrain Control Module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1600 Ford indicates PATS Ignition Key Transponder Signal Is Not Received.
- Common causes
- Common causes include Faulty Passive Anti-Theft System (PATS) key, Faulty PATS transceiver, Faulty Powertrain Control Module (PCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1600 Ford Description
What are the Possible Causes of the DTC B1600 Ford?
- Faulty Passive Anti-Theft System (PATS) key
- Faulty PATS transceiver
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC B1600 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1600 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1600 Ford code?
Need more information on how to fix the B1600 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1600 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1600 Ford Code
1. What are the common symptoms of OBDII code B1600 Ford related to PATS Ignition Key Transponder Signal Not Received?
- Common symptoms include the engine not starting, a flashing anti-theft light on the dashboard, and the vehicle going into theft mode.
2. What are the possible causes of OBDII code B1600 Ford indicating PATS Ignition Key Transponder Signal Not Received?
- Possible causes include a faulty transponder key, a damaged transceiver antenna ring, issues with the PATS module, or a wiring problem.
3. How can I diagnose the issue causing OBDII code B1600 Ford for PATS Ignition Key Transponder Signal Not Received?
- To diagnose, you can try using a different transponder key, checking the transceiver antenna ring for damage, inspecting the wiring for any faults, and scanning the PATS module for error codes.
4. Can I repair OBDII code B1600 Ford myself if it indicates PATS Ignition Key Transponder Signal Not Received?
- Repairing this issue may require specialized equipment and knowledge. It is recommended to consult a professional mechanic or a Ford dealership for proper diagnosis and repair.
5. Are there any temporary solutions if my vehicle shows OBDII code B1600 Ford for PATS Ignition Key Transponder Signal Not Received?
- You can try disconnecting the battery for a few minutes to reset the system, ensuring the key is properly inserted and turned in the ignition, and checking for any loose wiring connections.
6. How much does it typically cost to repair OBDII code B1600 Ford related to PATS Ignition Key Transponder Signal Not Received?
- The cost of repair can vary depending on the exact cause of the issue. It is advisable to get a diagnostic done to determine the specific repairs needed and associated costs.
7. Is it safe to continue driving my vehicle with OBDII code B1600 Ford showing PATS Ignition Key Transponder Signal Not Received?
- It is not recommended to drive the vehicle with this issue as it can lead to starting problems and potential security concerns. It's best to address the problem promptly.
8. Can a low battery in the transponder key cause OBDII code B1600 Ford for PATS Ignition Key Transponder Signal Not Received?
- Yes, a low battery in the transponder key can sometimes lead to issues with transmitting the signal to the vehicle's PATS system, triggering the error code B1600.
9. Will replacing the transponder key fix OBDII code B1600 Ford related to PATS Ignition Key Transponder Signal Not Received?
- Replacing the transponder key may solve the issue if the key is faulty or has a low battery. However, if the problem persists after key replacement, further diagnosis may be needed.
10. How long does it take to repair OBDII code B1600 Ford for PATS Ignition Key Transponder Signal Not Received?
- The repair time can vary depending on the exact cause of the issue and the availability of parts. It's best to consult with a professional to get an estimate of the repair timeline.
Discuss the causes and fixes for B1600 Ford OBDII Code
-
put new ignition in my 2004 Ford explorer sport Trac went to dealership to have keys programed and it pulled the b1600 code so now I have to figure out what is wrong with it
-
You got the B1600 code after reprogramming the keys? are you able to start the engine?
The B1600 code means that the key is not programmed or the device that receives the signal from the key is not working properly (Damage or disconnected).
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
