AutoCodes – Generic – B1567

B1567 Code - Lamp Headlamp High-Beam Circuit Failure

Quick Answer

The Body Control Module (BCM) monitors the Lamp Headlamp High-Beam. Common causes include Faulty Lamp Headlamp High-Beam, Lamp Headlamp High-Beam harness is open or shorted, Lamp Headlamp High-Beam circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1567 indicates Lamp Headlamp High-Beam Circuit Failure.
Common causes: Common causes include Faulty Lamp Headlamp High-Beam, Lamp Headlamp High-Beam harness is open or shorted, Lamp Headlamp High-Beam circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,162

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 04, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1567 Description

The Body Control Module (BCM) monitors the Lamp Headlamp High-Beam. The BCM sets the OBDII code when the Lamp Headlamp High-Beam is not to factory specifications.

OBDII Code B1567 - Lamp Headlamp High-Beam Circuit Failure - AutoCodes.com — B1567 Code - Lamp Headlamp High-Beam Circuit Failure

What does this mean?

What are the Possible Causes of the DTC B1567?

Faulty Lamp Headlamp High-Beam
Lamp Headlamp High-Beam harness is open or shorted
Lamp Headlamp High-Beam circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B1567?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1567 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1567 code?

Need more information on how to fix the B1567 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1567 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1567 Code

1. What are the common symptoms of OBDII code B1567 (Lamp Headlamp High-Beam Circuit Failure)?

The common symptoms include the high-beam headlamp not working, flickering high beams, or the high beams staying on constantly.

2. What are the possible causes of OBDII code B1567?

Possible causes of this code may include a faulty high-beam headlamp bulb, a problem with the high-beam circuit wiring, a defective high-beam switch, or issues with the body control module.

3. How can I diagnose the cause of OBDII code B1567?

To diagnose the issue, you can start by visually inspecting the high-beam headlamp bulb and its connections. You can also check the wiring harness for any damage or loose connections. Using a multimeter to test the circuit continuity and the high-beam switch can also help pinpoint the problem.

4. Can I drive my vehicle with OBDII code B1567?

It is not recommended to drive with this code as it may compromise your visibility on the road, especially at night or in low-light conditions. It is best to address the issue promptly to ensure your safety and the safety of others on the road.

5. How can I repair OBDII code B1567?

Repairing this code typically involves replacing the faulty high-beam headlamp bulb, repairing any damaged wiring in the high-beam circuit, or replacing the defective high-beam switch. If the issue is more complex, consulting a professional mechanic may be necessary.

6. Will OBDII code B1567 cause my vehicle to fail an emissions test?

While this code is related to the high-beam headlamp circuit and not emissions, it is still important to resolve it to maintain the overall functionality and safety of your vehicle.

7. Can a DIY enthusiast fix OBDII code B1567 at home?

Depending on your level of automotive knowledge and skills, you may be able to address this code at home. However, if you are unsure about the diagnosis or repair process, seeking help from a professional mechanic is advisable.

8. Is OBDII code B1567 a common issue in certain vehicle makes and models?

This code can occur in various vehicle makes and models that are equipped with OBDII systems and high-beam headlamp circuits. The prevalence of this issue may vary depending on the specific vehicle.

9. How much does it cost to repair OBDII code B1567 at a repair shop?

The cost of repairing this code can vary depending on the underlying cause, parts needed for replacement, and labor charges. It is recommended to get a few quotes from different repair shops to compare prices.

10. How can I prevent OBDII code B1567 from occurring in the future?

Regularly inspecting and maintaining your vehicle's lighting system, including the high-beam headlamps, can help prevent issues like B1567. Promptly addressing any lighting-related problems can also help avoid this code from occurring.