B1508 GMC Code - Low Voltage On Control Circuit
Quick Answer
The Body Control Module (BCM) monitors the load control circuit for opens, shorts to ground, and shorts to voltage. Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1508 GMC indicates Low Voltage On Control Circuit.
- Common causes
- Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1508 GMC Description
What are the Possible Causes of the DTC B1508 GMC?
- Faulty Body Control Module (BCM)
- Body Control Module harness is open or shorted
- Body Control Module circuit poor electrical connection
How to Fix the DTC B1508 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1508 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1508 GMC code?
Need more information on how to fix the B1508 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1508 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1508 GMC Code
1. What are common symptoms of OBDII code B1508 GMC (Low Voltage On Control Circuit)?
- Common symptoms include rough idling, poor engine performance, and an illuminated check engine light.
2. What causes OBDII code B1508 GMC to appear?
- This code is typically triggered by issues such as a faulty control module, damaged wiring, or a weak electrical connection.
3. How can I diagnose the root cause of OBDII code B1508 GMC?
- To diagnose the issue, you may need to perform a thorough inspection of the control circuit, check for loose connections, and use a multimeter to test voltage levels.
4. Can a DIY enthusiast repair OBDII code B1508 GMC at home?
- Depending on the underlying cause, some DIY repairs may be possible, such as repairing damaged wiring or replacing a faulty control module. However, complex electrical issues may require professional assistance.
5. Are there any quick fixes for OBDII code B1508 GMC?
- Quick fixes such as checking and tightening electrical connections or replacing a blown fuse may sometimes resolve the issue, but these are temporary solutions and may not address the root cause.
6. What are the potential risks of ignoring OBDII code B1508 GMC?
- Ignoring this code can lead to further damage to the vehicle's electrical system, reduced fuel efficiency, and potentially more expensive repairs down the line.
7. How much does it typically cost to repair OBDII code B1508 GMC?
- The cost of repair can vary depending on the specific cause of the code, but it may range from a simple DIY fix to a more complex repair that could cost several hundred dollars at a professional auto repair shop.
8. Can OBDII code B1508 GMC cause my vehicle to fail an emissions test?
- Yes, if left unresolved, this code can affect the vehicle's emissions control system, leading to a failed emissions test.
9. Is it safe to continue driving with OBDII code B1508 GMC present?
- It is generally not recommended to drive with this code present, as it can impact your vehicle's performance and potentially lead to more serious issues if left unaddressed.
10. How can I prevent OBDII code B1508 GMC from recurring in the future?
- Regular maintenance, including checking and maintaining electrical connections, inspecting wiring for damage, and addressing any electrical issues promptly, can help prevent this code from reappearing.
Discuss the causes and fixes for B1508 GMC OBDII Code
Code B1508 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
