B1463 Code - Seat Belt Switch Circuit Open
Quick Answer
The Body Control Module (BCM) monitors the Seat Belt Switch. Common causes include Faulty Seat Belt Switch, Seat Belt Switch harness is open or shorted, Seat Belt Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1463 indicates Seat Belt Switch Circuit Open.
- Common causes
- Common causes include Faulty Seat Belt Switch, Seat Belt Switch harness is open or shorted, Seat Belt Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1463 Description
What are the Possible Causes of the DTC B1463?
- Faulty Seat Belt Switch
- Seat Belt Switch harness is open or shorted
- Seat Belt Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B1463?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1463 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1463 code?
Need more information on how to fix the B1463 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1463 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1463 Chrysler — Channel 1 Audio Speaker Output Circuit Open
- B1463 Dodge — Channel 1 Audio Speaker Output Circuit Open
- B1463 Ford — Charge Port Light Ring LED Segment 3 No Sub Type Information
- B1463 Jeep — Channel 1 Audio Speaker Output Circuit Open
- B1463 Lincoln — Charge Port Light Ring LED Segment 3 No Sub Type Information
- B1463 Mercury — Charge Port Light Ring LED Segment 3 No Sub Type Information
- B1463 RAM — Channel 1 Audio Speaker Output Circuit Open
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1463 Code
1. What are the common symptoms of OBDII code B1463 (Seat Belt Switch Circuit Open)?
- The common symptoms include the airbag warning light illuminated on the dashboard and a potential loss of functionality in the seat belt reminder system.
2. What can cause the OBDII code B1463 to trigger?
- The code B1463 is typically triggered when there is an open circuit in the seat belt switch, which may be caused by a faulty seat belt switch, damaged wiring, or a poor connection.
3. How serious is the OBDII code B1463 (Seat Belt Switch Circuit Open)?
- While the code may not affect the vehicle's drivability, it is crucial for safety as it can impact the proper functioning of the seat belt reminder system and potentially the airbag system.
4. How can I diagnose the seat belt switch circuit issue causing code B1463?
- Diagnosing the problem may involve inspecting the seat belt switch, checking the wiring for any damage or loose connections, and using a multimeter to test for continuity in the circuit.
5. Can I drive my vehicle with OBDII code B1463 active?
- It is not recommended to drive the vehicle with the code B1463 active, as it may lead to the seat belt reminder system not working correctly, potentially compromising safety in the event of an accident.
6. What are the repair options for fixing OBDII code B1463?
- Repair options may include replacing the faulty seat belt switch, repairing or replacing damaged wiring, ensuring proper connections, and clearing the fault code with an OBDII scanner.
7. Does fixing OBDII code B1463 require professional assistance?
- While some DIY enthusiasts may be able to diagnose and fix the issue, it is recommended to seek professional assistance, especially when dealing with safety-related systems like seat belts and airbags.
8. Are there any preventive measures to avoid OBDII code B1463 in the future?
- Regularly inspecting the seat belt components, avoiding any physical damage to the wiring, and addressing any seat belt issues promptly can help prevent the occurrence of code B1463.
9. Can a disconnected or malfunctioning seat belt switch cause other problems in the vehicle?
- A disconnected or malfunctioning seat belt switch may not directly cause other problems, but it can affect the proper operation of the seat belt reminder system and potentially impact the airbag system's functionality.
10. How long does it typically take to repair OBDII code B1463?
- The repair time for OBDII code B1463 can vary depending on the extent of the issue and the expertise of the person performing the repair. It may take anywhere from 30 minutes to a few hours to diagnose and fix the problem.
Discuss the causes and fixes for B1463 OBDII Code
Code B1463 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
