B1415 Ford Code - Driver Side Restraints Sensor 2
Quick Answer
The Restraint Control Module (RCM) monitors the passenger front door and LH C-pillar side impact sensors and circuits for the following faults: Open circuit, Short to voltage, Short to ground, Faulted passenger front door side impact sensor, Faulted LH C-pillar side impact sensor. Common causes include Faulty Driver Side Restraints Sensor 2, Driver Side Restraints Sensor 2 harness is open or shorted, Driver Side Restraints Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1415 Ford indicates Driver Side Restraints Sensor 2.
- Common causes
- Common causes include Faulty Driver Side Restraints Sensor 2, Driver Side Restraints Sensor 2 harness is open or shorted, Driver Side Restraints Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1415 Ford Description
What are the Possible Causes of the DTC B1415 Ford?
- Faulty Driver Side Restraints Sensor 2
- Driver Side Restraints Sensor 2 harness is open or shorted
- Driver Side Restraints Sensor 2 circuit poor electrical connection
- Faulty Restraint Control Module (RCM)
How to Fix the DTC B1415 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1415:93 Driver Side Restraints Sensor 2 No Operation
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1415 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1415 Ford code?
Need more information on how to fix the B1415 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1415 Ford code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1415 Ford Code
1. What does OBDII code B1415 for Ford indicate?
The B1415 code specifically relates to the Driver Side Restraints Sensor 2 on Ford vehicles.
2. What are the common symptoms of a B1415 Ford code?
Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the driver's side airbag system.
3. What are the possible causes of the B1415 Ford code?
Possible causes of B1415 can include a faulty driver side restraints sensor 2, wiring issues, or a problem with the airbag control module.
4. How can I diagnose the B1415 Ford code?
Diagnosing the B1415 code typically involves using a diagnostic scanner to read the code and checking the driver side restraints sensor 2 and related wiring for any visible damage.
5. Can I still drive my Ford with a B1415 code?
It is not recommended to drive your vehicle with an active B1415 code, as it indicates a potential issue with the driver's side airbag system, compromising safety in the event of a collision.
6. Is it safe to reset the B1415 Ford code without fixing the underlying issue?
Resetting the B1415 code without addressing the root cause can temporarily clear the warning light, but the issue will likely reoccur, potentially putting your safety at risk.
7. How much does it typically cost to repair a B1415 Ford code?
The cost of repairing a B1415 code can vary depending on the exact cause of the issue, but it may involve replacing the driver side restraints sensor 2 or repairing damaged wiring.
8. Can I fix the B1415 Ford code myself?
While some DIY enthusiasts may attempt to diagnose and fix the B1415 code themselves, it is recommended to seek professional help, especially when dealing with airbag systems for safety reasons.
9. How urgent is it to address the B1415 Ford code?
Addressing the B1415 code promptly is crucial for ensuring the proper functioning of the driver's side airbag system and maintaining safety in the event of an accident.
10. Are there any recalls or service bulletins related to the B1415 Ford code?
It's recommended to check with Ford dealership or the National Highway Traffic Safety Administration (NHTSA) to see if there are any recalls or service bulletins related to the B1415 code for your specific vehicle model.
Discuss the causes and fixes for B1415 Ford OBDII Code
Code B1415 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
