B1413 Ford Code - Frontal Restraints Sensor
Quick Answer
The Restraint Control Module (RCM) monitors the LH front impact severity sensor circuits for the following faults: Open circuit, Short to voltage, Short to ground, Faulted LH front impact severity sensor. Common causes include Faulty Frontal Restraints Sensor, Frontal Restraints Sensor harness is open or shorted, Frontal Restraints Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1413 Ford indicates Frontal Restraints Sensor.
- Common causes
- Common causes include Faulty Frontal Restraints Sensor, Frontal Restraints Sensor harness is open or shorted, Frontal Restraints Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1413 Ford Description
What are the Possible Causes of the DTC B1413 Ford?
- Faulty Frontal Restraints Sensor
- Frontal Restraints Sensor harness is open or shorted
- Frontal Restraints Sensor circuit poor electrical connection
- Faulty Restraint Control Module (RCM)
How to Fix the DTC B1413 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1413:93 Driver Frontal Restraints Sensor No Operation
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1413 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1413 Ford code?
Need more information on how to fix the B1413 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1413 Ford code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1413 Ford Code
1. What are the common symptoms of OBDII code B1413 Ford related to the Frontal Restraints Sensor?
- Common symptoms include the airbag warning light being illuminated on the dashboard and the airbag system possibly being disabled.
2. What are the potential causes of OBDII code B1413 Ford for the Frontal Restraints Sensor?
- The code can be triggered by a faulty Frontal Restraints Sensor, damaged wiring or connectors, or a problem with the airbag control module.
3. How can I diagnose the issue causing OBDII code B1413 Ford for the Frontal Restraints Sensor?
- Diagnosing the issue often involves using a scan tool to retrieve the specific fault code, checking the wiring and connectors for damage, and testing the Frontal Restraints Sensor itself.
4. Can I still drive my vehicle with OBDII code B1413 Ford related to the Frontal Restraints Sensor?
- It is not recommended to drive the vehicle with the airbag system disabled, as it may not deploy in the event of a collision. It is best to address the issue as soon as possible.
5. How can I repair OBDII code B1413 Ford for the Frontal Restraints Sensor?
- Repair methods may vary depending on the underlying cause, but typical repairs include replacing the faulty Frontal Restraints Sensor, repairing damaged wiring or connectors, or reprogramming the airbag control module.
6. Is it safe to reset the OBDII code B1413 Ford related to the Frontal Restraints Sensor without fixing the underlying issue?
- It is not recommended to reset the code without addressing the root cause, as the airbag system may still be compromised and not function properly in case of an accident.
7. Can a DIY enthusiast fix OBDII code B1413 Ford for the Frontal Restraints Sensor?
- While some aspects of diagnosing and repairing the issue can be done by a DIY enthusiast, working on the airbag system requires caution and expertise due to safety concerns. It is recommended to seek professional help.
8. What are some tips to prevent OBDII code B1413 Ford from occurring for the Frontal Restraints Sensor?
- Regularly inspecting the airbag system components, avoiding water damage to the sensors and connectors, and driving cautiously to prevent accidents that could trigger the code can help prevent this issue.
9. Will fixing OBDII code B1413 Ford for the Frontal Restraints Sensor be expensive?
- The cost of fixing the issue can vary depending on the specific cause and the labor rates of the repair shop. It is best to get a diagnostic from a qualified technician to determine the exact cost.
10. How long does it typically take to repair OBDII code B1413 Ford related to the Frontal Restraints Sensor?
- The repair time can vary based on the cause of the issue and the availability of parts. Simple fixes like replacing a sensor or connector may take a few hours, while more complex issues could require a day or more.
Discuss the causes and fixes for B1413 Ford OBDII Code
Code B1413 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
