B1383 KIA Code - Front-Passenger Side Airbag Resistance Too Low
Quick Answer
The Side Airbag located in driver and passenger seat protects passenger head and shoulder. Common causes include Faulty Front-Passenger Side Airbag, Front-Passenger Side Airbag harness is open or shorted, Front-Passenger Side Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1383 KIA indicates Front-Passenger Side Airbag Resistance Too Low.
- Common causes
- Common causes include Faulty Front-Passenger Side Airbag, Front-Passenger Side Airbag harness is open or shorted, Front-Passenger Side Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1383 KIA Description
What are the Possible Causes of the DTC B1383 KIA?
- Faulty Front-Passenger Side Airbag
- Front-Passenger Side Airbag harness is open or shorted
- Front-Passenger Side Airbag circuit poor electrical connection
- Faulty Supplemental Restraint System Control Module (SRSCM)
How to Fix the DTC B1383 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1383 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1383 KIA code?
Need more information on how to fix the B1383 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1383 KIA code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1383 KIA Code
1. What are the common symptoms of OBDII code B1383 in a KIA?
- The common symptoms include the airbag warning light illuminating on the dashboard and a diagnostic trouble code (DTC) B1383 being stored in the vehicle's system.
2. What does the OBDII code B1383 in a KIA indicating "Front-Passenger Side Airbag Resistance Too Low" mean?
- This code indicates that there is an issue with the front-passenger side airbag system, specifically that the resistance in the circuit is lower than the expected value.
3. What are the possible causes of OBDII code B1383 in a KIA?
- The possible causes include a malfunctioning front-passenger side airbag sensor, damaged wiring or connectors in the airbag system, or a fault in the airbag control module.
4. How can I diagnose the OBDII code B1383 in my KIA?
- Diagnosing this code typically involves using a scan tool to retrieve the DTC, inspecting the front-passenger side airbag system components for physical damage, and testing the resistance values in the circuit.
5. Can I still drive my KIA with the OBDII code B1383 present?
- It is not recommended to drive the vehicle with the airbag warning light illuminated, as it indicates a potential safety issue with the airbag system. It is advisable to address the problem promptly.
6. How can I repair OBDII code B1383 in my KIA?
- Repairing this code may involve replacing the front-passenger side airbag sensor, repairing or replacing damaged wiring or connectors, or resetting the airbag control module after addressing the underlying issue.
7. Is it safe to reset the OBDII code B1383 in my KIA without fixing the underlying problem?
- It is not safe to reset the code without addressing the root cause, as it may lead to the airbag system not functioning properly in the event of a collision.
8. Can I fix the OBDII code B1383 in my KIA myself, or do I need to take it to a professional mechanic?
- While some DIY enthusiasts may be able to diagnose and fix this code themselves, it is recommended to consult a professional mechanic with experience in airbag systems to ensure the repair is done correctly and safely.
9. Are there any recalls or technical service bulletins related to OBDII code B1383 in KIA vehicles?
- It is advisable to check with the manufacturer or authorized dealerships for any recalls or technical service bulletins related to this specific OBDII code in KIA vehicles.
10. How important is it to address the OBDII code B1383 in my KIA promptly?
- It is crucial to address this code promptly as it relates to the safety of the front-passenger side airbag system, which is a critical component in protecting occupants in the event of a collision.
Discuss the causes and fixes for B1383 KIA OBDII Code
Code B1383 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
