B1383 Hyundai Code - Front-Passenger Side Airbag Resistance Too Low
Quick Answer
The Side Airbag located in driver and passenger seat protects passenger head and shoulder. Common causes include Faulty Front-Passenger Side Airbag, Front-Passenger Side Airbag harness is open or shorted, Front-Passenger Side Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1383 Hyundai indicates Front-Passenger Side Airbag Resistance Too Low.
- Common causes
- Common causes include Faulty Front-Passenger Side Airbag, Front-Passenger Side Airbag harness is open or shorted, Front-Passenger Side Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1383 Hyundai Description
What are the Possible Causes of the DTC B1383 Hyundai?
- Faulty Front-Passenger Side Airbag
- Front-Passenger Side Airbag harness is open or shorted
- Front-Passenger Side Airbag circuit poor electrical connection
- Faulty Supplemental Restraint System Control Module (SRSCM)
How to Fix the DTC B1383 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1383 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1383 Hyundai code?
Need more information on how to fix the B1383 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1383 Hyundai code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1383 Hyundai Code
What does the OBDII code B1383 mean on a Hyundai?
B1383 indicates that the resistance in the front-passenger side airbag circuit is below the acceptable range, which could affect airbag deployment.
What are the symptoms of code B1383 in a Hyundai?
Common symptoms include an illuminated airbag warning light on the dashboard and potential deactivation of the front-passenger side airbag.
What causes the B1383 code to appear on a Hyundai?
Possible causes include a faulty airbag module, damaged or corroded wiring, a loose connection in the airbag circuit, or a defective clock spring.
Is it safe to drive with the B1383 code active?
No, it is not safe. The airbag system may not function correctly in the event of a collision, putting passengers at risk.
How can I diagnose the B1383 code on my Hyundai?
Use an OBDII scanner to confirm the code, then inspect the airbag wiring, connectors, and resistance levels in the front-passenger side airbag circuit.
Can I clear the B1383 code without fixing the problem?
Clearing the code without addressing the issue is not recommended, as the problem will likely return and the airbag system may remain compromised.
How is the B1383 code repaired?
Repairs may include replacing damaged wiring, fixing faulty connectors, cleaning corroded terminals, or replacing the airbag module if necessary.
What tools are needed to fix the B1383 code?
You may need an OBDII scanner, a multimeter to check resistance, and basic tools for inspecting and repairing wiring or connectors.
Can a faulty clock spring cause the B1383 code?
Yes, a damaged or worn clock spring in the steering wheel can cause resistance issues in the airbag circuit, triggering the B1383 code.
Should I attempt to fix the B1383 code myself?
If you are not experienced with airbag systems, it’s best to have a certified mechanic handle the repairs to avoid accidental airbag deployment or further damage.
Discuss the causes and fixes for B1383 Hyundai OBDII Code
Code B1383 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
