AutoCodes – Generic – B1383

B1383 Code - Oil Level Lamp Circuit Short To Battery

Quick Answer

The Powertrain Control Module (PCM) monitors the Oil Level Lamp. Common causes include Faulty Oil Level Lamp, Oil Level Lamp harness is open or shorted, Oil Level Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1383 indicates Oil Level Lamp Circuit Short To Battery.
Common causes
Common causes include Faulty Oil Level Lamp, Oil Level Lamp harness is open or shorted, Oil Level Lamp circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 7,729
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 20, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B1383 Description

The Powertrain Control Module (PCM) monitors the Oil Level Lamp. The PCM sets the OBDII code when the Oil Level Lamp is not to factory specifications.
OBDII Code B1383 - Oil Level Lamp Circuit Short To Battery - AutoCodes.com
B1383 Code - Oil Level Lamp Circuit Short To Battery

What are the Possible Causes of the DTC B1383?

  • Faulty Oil Level Lamp
  • Oil Level Lamp harness is open or shorted
  • Oil Level Lamp circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)

How to Fix the DTC B1383?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1383 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1383 code?

Need more information on how to fix the B1383 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1383 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

  • B1383 Hyundai β€” Front-Passenger Side Airbag Resistance Too Low
  • B1383 KIA β€” Front-Passenger Side Airbag Resistance Too Low
About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1383 Code

1. What are the common symptoms of OBDII code B1383 (Oil Level Lamp Circuit Short To Battery)?

The common symptoms include a constantly illuminated oil level lamp on the dashboard or a warning message indicating low oil level.

2. What are the possible causes of OBDII code B1383?

Possible causes include a short circuit in the oil level sensor wiring, a faulty oil level sensor, or a malfunction in the instrument cluster.

3. How can I diagnose the cause of OBDII code B1383?

To diagnose the issue, you can start by inspecting the oil level sensor wiring for any visible damage or corrosion. You can also use a multimeter to check for continuity and proper voltage levels in the circuit.

4. Can I still drive my vehicle with OBDII code B1383?

It is not recommended to drive your vehicle with this code because you may not receive accurate oil level information, which can lead to potential engine damage.

5. How can I repair OBDII code B1383?

If the issue is a short circuit in the wiring, you can repair or replace the damaged wires. If the oil level sensor is faulty, it will need to be replaced. For instrument cluster malfunctions, professional diagnosis and repair may be necessary.

6. Is OBDII code B1383 a serious issue?

While the code itself may not affect the immediate drivability of the vehicle, it is important to address it promptly to ensure proper monitoring of the oil level and prevent potential engine damage.

7. Can a DIY enthusiast fix OBDII code B1383?

Depending on your skill level and access to tools, you may be able to address simple causes like wiring issues. However, for more complex issues involving sensor replacement or instrument cluster repair, professional help may be needed.

8. Will resetting the OBDII system clear code B1383?

Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear after driving the vehicle for some time.

9. How much does it cost to repair OBDII code B1383?

The cost of repair can vary depending on the cause of the issue and whether you choose to address it yourself or seek professional assistance. Costs may include parts and labor.

10. Can OBDII code B1383 cause any long-term damage to the vehicle?

If left unresolved, OBDII code B1383 can potentially lead to incorrect oil level readings, which may result in engine damage due to inadequate lubrication. It is important to address the issue promptly.

Discuss the causes and fixes for B1383 OBDII Code

Code B1383 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play