B1380 KIA Code - Front-Driver Side Airbag Resistance Circuit Short To Ground
Quick Answer
The Side Airbag located in driver and passenger seat protects passenger head and shoulder. Common causes include Faulty Front-Driver Side Airbag, Front-Driver Side Airbag harness is open or shorted, Front-Driver Side Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1380 KIA indicates Front-Driver Side Airbag Resistance Circuit Short To Ground.
- Common causes
- Common causes include Faulty Front-Driver Side Airbag, Front-Driver Side Airbag harness is open or shorted, Front-Driver Side Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1380 KIA Description
What are the Possible Causes of the DTC B1380 KIA?
- Faulty Front-Driver Side Airbag
- Front-Driver Side Airbag harness is open or shorted
- Front-Driver Side Airbag circuit poor electrical connection
- Faulty Supplemental Restraint System Control Module (SRSCM)
How to Fix the DTC B1380 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1380 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1380 KIA code?
Need more information on how to fix the B1380 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1380 KIA code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1380 KIA Code
1. What are common symptoms of OBDII code B1380 in a KIA related to the front driver side airbag resistance circuit short to ground?
The airbag warning light on the dashboard may illuminate, and the airbag system may be disabled.
2. What are possible causes of the B1380 code in a KIA indicating a front driver side airbag resistance circuit short to ground?
Potential causes include damaged wiring, a faulty airbag module, or a malfunctioning airbag sensor.
3. How can I diagnose the front driver side airbag resistance circuit short to ground issue in my KIA?
Using a multimeter, check the wiring for continuity and inspect for any visible damage. Additionally, perform a thorough inspection of the airbag system components.
4. Can I repair the B1380 code in a KIA myself?
While diagnosing and repairing electrical issues can be complex, some DIY enthusiasts may be able to address this problem by carefully inspecting the wiring and connections.
5. Is it safe to drive my KIA with the B1380 code indicating a front driver side airbag resistance circuit short to ground?
It is not recommended to drive the vehicle with the airbag system disabled, as it may not deploy in the event of a collision.
6. How much does it typically cost to repair the B1380 code in a KIA?
The cost of repair can vary depending on the exact cause of the issue and whether you choose to address it yourself or take it to a professional mechanic.
7. Can a mechanic reset the B1380 code without fixing the underlying issue?
Resetting the code without addressing the root cause will not solve the problem and may lead to the airbag warning light reappearing.
8. Are there any recalls or service bulletins related to OBDII code B1380 in KIA vehicles?
It's advisable to check with your local KIA dealership or visit the manufacturer's website to see if there are any relevant recalls or service bulletins for this issue.
9. How long does it typically take to repair the front driver side airbag resistance circuit short to ground issue in a KIA?
The repair time can vary based on the specific problem, but it may take a few hours to a full day to diagnose and fix the issue.
10. Will fixing the B1380 code in my KIA front driver side airbag resistance circuit short to ground issue require replacement parts?
Depending on the cause of the problem, you may need to replace damaged wiring, the airbag module, or other components in the airbag system.
Discuss the causes and fixes for B1380 KIA OBDII Code
Code B1380 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
