B1379 KIA Code - Front-Driver Side Airbag Resistance Too Low
Quick Answer
The Side Airbag located in driver and passenger seat protects passenger head and shoulder. Common causes include Faulty Front-Driver Side Airbag, Front-Driver Side Airbag harness is open or shorted, Front-Driver Side Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1379 KIA indicates Front-Driver Side Airbag Resistance Too Low.
- Common causes
- Common causes include Faulty Front-Driver Side Airbag, Front-Driver Side Airbag harness is open or shorted, Front-Driver Side Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1379 KIA Description
What are the Possible Causes of the DTC B1379 KIA?
- Faulty Front-Driver Side Airbag
- Front-Driver Side Airbag harness is open or shorted
- Front-Driver Side Airbag circuit poor electrical connection
- Faulty Supplemental Restraint System Control Module (SRSCM)
How to Fix the DTC B1379 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1379 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1379 KIA code?
Need more information on how to fix the B1379 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1379 KIA code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1379 KIA Code
1. What are the common symptoms of OBDII code B1379 for Kia related to Front-Driver Side Airbag Resistance Too Low?
The common symptoms include the airbag warning light illuminating on the dashboard and a diagnostic trouble code being stored in the vehicle's computer system.
2. What are the possible causes of OBDII code B1379 in a Kia, indicating Front-Driver Side Airbag Resistance Too Low?
Possible causes include a faulty airbag sensor, damaged wiring or connectors in the airbag system, or issues with the airbag itself.
3. How can I diagnose the Front-Driver Side Airbag Resistance Too Low issue in my Kia with OBDII code B1379?
Diagnosis involves using an OBDII scanner to retrieve the trouble code, inspecting the airbag system wiring and connections, and testing the airbag sensor for proper resistance levels.
4. Can I drive my Kia with OBDII code B1379 indicating Front-Driver Side Airbag Resistance Too Low?
It is not recommended to drive the vehicle with this issue, as it may compromise the effectiveness of the airbag system in the event of a collision.
5. What is the typical repair process for addressing OBDII code B1379 in a Kia for Front-Driver Side Airbag Resistance Too Low?
The repair process may involve replacing the faulty airbag sensor, repairing damaged wiring or connectors, or replacing the airbag itself as needed.
6. Are there any safety precautions I should take when working on the Front-Driver Side Airbag Resistance Too Low issue in my Kia?
It is crucial to disconnect the vehicle's battery and wait for the airbag system to fully discharge before working on any components related to the airbag system to prevent accidental deployment.
7. Can I reset the OBDII code B1379 for Front-Driver Side Airbag Resistance Too Low in my Kia without addressing the underlying issue?
Resetting the code without addressing the root cause will not resolve the problem and may lead to the issue recurring in the future.
8. How long does it typically take to repair OBDII code B1379 related to Front-Driver Side Airbag Resistance Too Low in a Kia?
The repair time can vary depending on the exact cause of the issue and the availability of replacement parts, but it may take a few hours to a full day to complete the repair.
9. Is it possible to prevent OBDII code B1379 for Front-Driver Side Airbag Resistance Too Low from occurring in my Kia?
Regular maintenance and inspection of the airbag system, prompt repair of any detected issues, and careful handling of the vehicle can help prevent this code from occurring.
Discuss the causes and fixes for B1379 KIA OBDII Code
Code B1379 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
