AutoCodes – KIA – B1368 KIA

B1368 KIA Code - Front-Passenger Seat Belt Pretensioner Resistance Too Low

Quick Answer

The Seat Belt Pretensioners (BPT) are located at both sides of the center pillar. Common causes include Faulty Front-Passenger Seat Belt Pretensioner, Front-Passenger Seat Belt Pretensioner harness is open or shorted, Front-Passenger Seat Belt Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1368 KIA indicates Front-Passenger Seat Belt Pretensioner Resistance Too Low.
Common causes: Common causes include Faulty Front-Passenger Seat Belt Pretensioner, Front-Passenger Seat Belt Pretensioner harness is open or shorted, Front-Passenger Seat Belt Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,521

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1368 KIA Description

The Seat Belt Pretensioners (BPT) are located at both sides of the center pillar. The Seat Belt Pretensioner tightens seat belt before air bag deploys to protect the passenger from bumping against crush pad, steering wheel, and front window. In the Seat Belt Pretensioner, there are an ignition circuit and cylinder for rewinding belt. Gas chamber generates an expansive force of gases to push the piston in the cylinder to lock the seat belt. The Seat Belt Pretensioners circuit consists of the Supplemental Restraint System Control Module (SRSCM) and two Seat Belt Pretensioners. The SRSCM sets the Diagnostic Trouble Code (DTC) if it detects that the resistance of BPT squib is too high or low.

OBDII Code B1368 KIA - Front-Passenger Seat Belt Pretensioner Resistance Too Low - AutoCodes.com — B1368 KIA Code - Front-Passenger Seat Belt Pretensioner Resistance Too Low

What does this mean?

What are the Possible Causes of the DTC B1368 KIA?

Faulty Front-Passenger Seat Belt Pretensioner
Front-Passenger Seat Belt Pretensioner harness is open or shorted
Front-Passenger Seat Belt Pretensioner circuit poor electrical connection
Faulty Supplemental Restraint System Control Module (SRSCM)

How to Fix the DTC B1368 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1368 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1368 KIA code?

Need more information on how to fix the B1368 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1368 KIA code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1368 KIA Code

1. What are the common symptoms of OBDII code B1368 in a KIA related to the front-passenger seat belt pretensioner?

The common symptoms include the airbag warning light illuminating on the dashboard and a diagnostic trouble code indicating "Front-Passenger Seat Belt Pretensioner Resistance Too Low."

2. What typically causes the OBDII code B1368 in a KIA?

This code is usually triggered by a malfunction in the front-passenger seat belt pretensioner system, such as a faulty pretensioner or wiring issue causing low resistance.

3. How can I diagnose the OBDII code B1368 in my KIA?

Diagnosing this code requires a professional OBDII scanner to retrieve the specific fault code, followed by inspecting the front-passenger seat belt pretensioner system for any visible damage or wiring issues.

4. What repair options are available for fixing OBDII code B1368 in a KIA?

Repair options may include repairing or replacing the front-passenger seat belt pretensioner, addressing any wiring faults, and clearing the diagnostic trouble code with the OBDII scanner.

5. Can I continue driving my KIA with OBDII code B1368 present?

It is not recommended to drive the vehicle with this code unresolved, as it indicates a potential safety issue with the front-passenger seat belt pretensioner system that could affect the proper deployment of the airbag in case of an accident.

6. How much does it cost to repair OBDII code B1368 in a KIA?

The cost of repairing this code can vary depending on the extent of the damage and the specific components that need to be replaced. It is advisable to consult a professional mechanic for an accurate estimate.

7. Are there any safety concerns associated with OBDII code B1368 in a KIA?

Yes, unresolved issues related to the front-passenger seat belt pretensioner system can compromise the effectiveness of the airbag system, potentially putting the occupant at risk in the event of a collision.

8. Can I reset the OBDII code B1368 in my KIA without fixing the underlying issue?

While you can clear the diagnostic trouble code temporarily using an OBDII scanner, the code is likely to reappear until the root cause of the problem, such as the seat belt pretensioner issue, is resolved.

9. How long does it take to repair OBDII code B1368 in a KIA?

The repair time can vary depending on the complexity of the issue and the availability of parts. In general, a skilled mechanic should be able to address this problem within a few hours to a day.

10. Is it possible to prevent OBDII code B1368 from occurring in my KIA?

Regular maintenance and inspections of the seat belt pretensioner system, along with prompt addressing of any warning lights or unusual behaviors, can help prevent the occurrence of this code in your KIA.