AutoCodes – Hyundai – B1364 Hyundai

B1364 Hyundai Code - Front-Driver Seat Belt Pretensioner Circuit Short To Battery

Quick Answer

The Seat Belt Pretensioners (BPT) are located at both sides of the center pillar. Common causes include Faulty Front-Driver Seat Belt Pretensioner, Front-Driver Seat Belt Pretensioner harness is open or shorted, Front-Driver Seat Belt Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1364 Hyundai indicates Front-Driver Seat Belt Pretensioner Circuit Short To Battery.
Common causes: Common causes include Faulty Front-Driver Seat Belt Pretensioner, Front-Driver Seat Belt Pretensioner harness is open or shorted, Front-Driver Seat Belt Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,293

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1364 Hyundai Description

The Seat Belt Pretensioners (BPT) are located at both sides of the center pillar. The Seat Belt Pretensioner tightens seat belt before air bag deploys to protect the passenger from bumping against crush pad, steering wheel, and front window. In the Seat Belt Pretensioner, there are an ignition circuit and cylinder for rewinding belt. Gas chamber generates an expansive force of gases to push the piston in the cylinder to lock the seat belt. The Seat Belt Pretensioners circuit consists of the Supplemental Restraint System Control Module (SRSCM) and two Seat Belt Pretensioners. The SRSCM sets the Diagnostic Trouble Code (DTC) if it detects that the resistance of BPT squib is too high or low.

OBDII Code B1364 Hyundai - Front-Driver Seat Belt Pretensioner Circuit Short To Battery - AutoCodes.com — B1364 Hyundai Code - Front-Driver Seat Belt Pretensioner Circuit Short To Battery

What does this mean?

What are the Possible Causes of the DTC B1364 Hyundai?

Faulty Front-Driver Seat Belt Pretensioner
Front-Driver Seat Belt Pretensioner harness is open or shorted
Front-Driver Seat Belt Pretensioner circuit poor electrical connection
Faulty Supplemental Restraint System Control Module (SRSCM)

How to Fix the DTC B1364 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1364 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1364 Hyundai code?

Need more information on how to fix the B1364 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1364 Hyundai code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1364 Hyundai Code

1. What are the common symptoms of OBDII code B1364 Hyundai?

The common symptoms of OBDII code B1364 in a Hyundai include the airbag warning light illuminating on the dashboard and potential issues with the front driver seat belt pretensioner system.

2. What does the OBDII code B1364 Hyundai indicate?

OBDII code B1364 for a Hyundai indicates a front driver seat belt pretensioner circuit short to battery. This means that there is an electrical issue in the seat belt pretensioner system.

3. What are the possible causes of OBDII code B1364 in a Hyundai?

The possible causes of OBDII code B1364 in a Hyundai include a short circuit in the wiring harness, a faulty seat belt pretensioner, or a problem with the airbag control module.

4. How serious is OBDII code B1364 in a Hyundai?

OBDII code B1364 in a Hyundai is a serious issue as it involves the seat belt pretensioner system, which is designed to enhance occupant safety in the event of a collision. It is recommended to address this problem promptly.

5. Can I continue driving with OBDII code B1364 in my Hyundai?

It is not advisable to continue driving with OBDII code B1364 in your Hyundai as it may compromise the effectiveness of the seat belt pretensioner system in the event of an accident.

6. How can OBDII code B1364 in a Hyundai be diagnosed?

OBDII code B1364 in a Hyundai can be diagnosed using a professional OBDII scanner to read the fault codes and further diagnostic tools to pinpoint the exact cause of the circuit short to battery.

7. What is the typical repair for OBDII code B1364 in a Hyundai?

The typical repair for OBDII code B1364 in a Hyundai involves addressing the specific cause of the circuit short to battery, which may include repairing or replacing the wiring harness, seat belt pretensioner, or airbag control module.

8. Can I fix OBDII code B1364 in a Hyundai myself?

Fixing OBDII code B1364 in a Hyundai may require advanced automotive knowledge and specific tools. It is recommended to consult a professional mechanic or dealership for proper diagnosis and repair.

9. Will OBDII code B1364 cause my airbags to deploy?

OBDII code B1364 itself will not cause the airbags to deploy, but it indicates a potential issue with the seat belt pretensioner system, which is part of the overall airbag system. It is important to address this problem to ensure proper airbag functionality in case of an accident.

10. How can I prevent OBDII code B1364 from occurring in my Hyundai?

To prevent OBDII code B1364 in your Hyundai, it is essential to properly maintain the seat belt pretensioner system, avoid any physical damage to the wiring harness, and address any warning lights or abnormal behavior promptly. Regular vehicle inspections can also help catch potential issues early.