AutoCodes – KIA – B1361 KIA

B1361 KIA Code - Front-Driver Seat Belt Pretensioner Resistance Too High

Quick Answer

The Seat Belt Pretensioners (BPT) are located at both sides of the center pillar. Common causes include Faulty Front-Driver Seat Belt Pretensioner, Front-Driver Seat Belt Pretensioner harness is open or shorted, Front-Driver Seat Belt Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1361 KIA indicates Front-Driver Seat Belt Pretensioner Resistance Too High.
Common causes: Common causes include Faulty Front-Driver Seat Belt Pretensioner, Front-Driver Seat Belt Pretensioner harness is open or shorted, Front-Driver Seat Belt Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,259

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1361 KIA Description

The Seat Belt Pretensioners (BPT) are located at both sides of the center pillar. The Seat Belt Pretensioner tightens seat belt before air bag deploys to protect the passenger from bumping against crush pad, steering wheel, and front window. In the Seat Belt Pretensioner, there are an ignition circuit and cylinder for rewinding belt. Gas chamber generates an expansive force of gases to push the piston in the cylinder to lock the seat belt. The Seat Belt Pretensioners circuit consists of the Supplemental Restraint System Control Module (SRSCM) and two Seat Belt Pretensioners. The SRSCM sets the Diagnostic Trouble Code (DTC) if it detects that the resistance of BPT squib is too high or low.

OBDII Code B1361 KIA - Front-Driver Seat Belt Pretensioner Resistance Too High - AutoCodes.com — B1361 KIA Code - Front-Driver Seat Belt Pretensioner Resistance Too High

What does this mean?

What are the Possible Causes of the DTC B1361 KIA?

Faulty Front-Driver Seat Belt Pretensioner
Front-Driver Seat Belt Pretensioner harness is open or shorted
Front-Driver Seat Belt Pretensioner circuit poor electrical connection
Faulty Supplemental Restraint System Control Module (SRSCM)

How to Fix the DTC B1361 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1361 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1361 KIA code?

Need more information on how to fix the B1361 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1361 KIA code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1361 KIA Code

1. What are common symptoms of OBDII code B1361 in a KIA related to the front-driver seat belt pretensioner resistance being too high?

The common symptoms include the airbag warning light illuminating on the dashboard and a potential message indicating a seat belt system malfunction.

2. What are the possible causes of OBDII code B1361 in a KIA indicating that the front-driver seat belt pretensioner resistance is too high?

Possible causes may include a faulty seat belt pretensioner, a damaged wiring harness in the seat belt system, or a poor electrical connection.

3. How can I diagnose the OBDII code B1361 in a KIA related to the front-driver seat belt pretensioner resistance being too high?

Diagnosis involves using an OBDII scanner to retrieve the specific error code, inspecting the seat belt pretensioner and wiring for any visible damage, and testing the electrical connections for proper continuity.

4. Is it safe to drive my KIA with the OBDII code B1361 indicating a front-driver seat belt pretensioner resistance too high?

It is not recommended to drive the vehicle with this issue, as it may compromise the effectiveness of the seat belt system and airbag deployment in the event of a collision.

5. How can I repair OBDII code B1361 in a KIA due to the front-driver seat belt pretensioner resistance being too high?

Repair typically involves replacing the faulty seat belt pretensioner, repairing any damaged wiring, and ensuring all electrical connections are secure and functioning properly.

6. Can I reset the OBDII code B1361 in my KIA after repairing the front-driver seat belt pretensioner resistance issue?

Yes, after completing the necessary repairs, the OBDII code can be cleared using an OBDII scanner to reset the system and turn off the warning light on the dashboard.

7. Are there any safety precautions to consider when working on the front-driver seat belt pretensioner system in a KIA?

It is important to disconnect the vehicle's battery before working on the seat belt pretensioner system to prevent accidental deployment of the airbags.

8. How can I prevent OBDII code B1361 from recurring in my KIA after repair?

Regularly inspecting the seat belt system for any signs of wear or damage, ensuring proper installation of components during repairs, and following maintenance schedules can help prevent the code from reoccurring.

9. Can a DIY enthusiast with automotive experience repair OBDII code B1361 in a KIA at home?

While some experienced DIY enthusiasts may be able to diagnose and repair the issue, working on the seat belt pretensioner system may require specialized tools and knowledge, so it is recommended to consult a professional mechanic.

10. Is the repair for OBDII code B1361 in a KIA covered under warranty?

Depending on the vehicle's warranty status and coverage, the repair for the seat belt pretensioner issue may be covered, but it is advisable to check with the dealership or manufacturer for specific details.