AutoCodes – KIA – B1354 KIA

B1354 KIA Code - Passenger-Side Air Bag Module First Stage Short To Ground

Quick Answer

A Passenger Air Bag (PAB) Module, located in the passenger side crash pad, contains a folded cushion together with an inflator unit. Common causes include Faulty Passenger-Side Air Bag Module, Passenger-Side Air Bag Module harness is open or shorted, Passenger-Side Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1354 KIA indicates Passenger-Side Air Bag Module First Stage Short To Ground.
Common causes: Common causes include Faulty Passenger-Side Air Bag Module, Passenger-Side Air Bag Module harness is open or shorted, Passenger-Side Air Bag Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,786

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1354 KIA Description

A Passenger Air Bag (PAB) Module, located in the passenger side crash pad, contains a folded cushion together with an inflator unit. The main circuit in the Supplemental Restraint System Control Module (SRSCM) senses and judges the force of impact and if necessary inflation of the cushion occurs. If battery voltage is too low or power is disconnected due to the impact, the voltage regulator and the back-up power circuit respectively will keep the voltage at a constant level. A self-diagnosis circuit is built into the SRS control module, When the ignition switch is turned ON, the SRSCM indicator light turns on and turns off, after about six seconds, if the system is operating normally. If the light does not come If the light does not turn on or does not turn back off after six seconds, or if it lights while driving, an abnormality in the system is indicated.

OBDII Code B1354 KIA - Passenger-Side Air Bag Module First Stage Short To Ground - AutoCodes.com — B1354 KIA Code - Passenger-Side Air Bag Module First Stage Short To Ground

What does this mean?

What are the Possible Causes of the DTC B1354 KIA?

Faulty Passenger-Side Air Bag Module
Passenger-Side Air Bag Module harness is open or shorted
Passenger-Side Air Bag Module circuit poor electrical connection
Faulty Supplemental Restraint System Control Module (SRSCM)

How to Fix the DTC B1354 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1354 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1354 KIA code?

Need more information on how to fix the B1354 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1354 KIA code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1354 KIA Code

1. What are the common symptoms of OBDII code B1354 in a KIA related to the Passenger-Side Air Bag Module First Stage Short To Ground?

- The common symptoms include the airbag warning light illuminating on the dashboard and a potential malfunction of the passenger-side airbag system.

2. What could cause the OBDII code B1354 in a KIA indicating a Passenger-Side Air Bag Module First Stage Short To Ground?

- The code may be triggered by a short to ground in the wiring harness or connectors related to the passenger-side airbag module.

3. How can I diagnose the OBDII code B1354 in my KIA for a Passenger-Side Air Bag Module First Stage Short To Ground?

- Diagnosing this code typically involves using a diagnostic scanner to read the fault codes and inspecting the wiring and connectors for any signs of damage or short circuits.

4. Is it safe to drive my KIA with the OBDII code B1354 indicating a Passenger-Side Air Bag Module First Stage Short To Ground?

- It is not recommended to drive the vehicle with this code active, as it may indicate a potential safety issue with the passenger-side airbag system.

5. What are some repair tips for fixing the OBDII code B1354 in a KIA related to a Passenger-Side Air Bag Module First Stage Short To Ground?

- Repair tips may include checking and repairing any damaged wiring, replacing faulty connectors, or resetting the airbag system after resolving the short to ground issue.

6. Can I reset the OBDII code B1354 in my KIA after fixing the Passenger-Side Air Bag Module First Stage Short To Ground issue?

- Once the underlying issue causing the code has been resolved, the code can be cleared using a diagnostic scanner to reset the airbag system and turn off the warning light.

7. Are there any safety precautions I should take when working on the OBDII code B1354 related to a Passenger-Side Air Bag Module Short To Ground in my KIA?

- It is important to disconnect the vehicle's battery before working on the airbag system to prevent accidental deployment and ensure safety during repairs.

8. How much does it typically cost to repair the OBDII code B1354 in a KIA due to a Passenger-Side Air Bag Module First Stage Short To Ground?

- The cost of repair can vary depending on the extent of the damage and the parts needed, but it may involve expenses for parts, labor, and diagnostic services.

9. Can a DIY enthusiast fix the OBDII code B1354 related to a Passenger-Side Air Bag Module Short To Ground in a KIA?

- While some DIY enthusiasts may have the skills to diagnose and repair wiring issues, working on the airbag system requires caution and expertise due to safety concerns.

10. Will the OBDII code B1354 in a KIA reset itself after fixing the Passenger-Side Air Bag Module First Stage Short To Ground problem?

- In some cases, the code may reset itself after the issue is fixed, but it is recommended to use a diagnostic scanner to clear the code and ensure proper functionality of the airbag system.