B1354 GMC Code - Passenger Front Airbag Short to Ground
Quick Answer
When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself. Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1354 GMC indicates Passenger Front Airbag Short to Ground.
- Common causes
- Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1354 GMC Description
Upon passing these test ignition and deployment loop voltages are measured to ensure that they are within their normal voltage ranges. The SDM monitors the voltages at the driver low and the passenger low to detect shorts to ground or voltage in the deploy loops.
The SDM checks the wiring connection to the passenger airbag module by letting the infinitesimal current flow through the internal circuit and verify the resistance.
What are the Possible Causes of the DTC B1354 GMC?
- Faulty Passenger Front Airbag
- Passenger Front Airbag harness is open or shorted
- Passenger Front Airbag circuit poor electrical connection
How to Fix the DTC B1354 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1354 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1354 GMC code?
Need more information on how to fix the B1354 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1354 GMC code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1354 GMC Code
1. What are the common symptoms of OBDII code B1354 GMC (Passenger Front Airbag Short to Ground)?
- The common symptoms include the airbag warning light illuminating on the dashboard and a potential loss of functionality of the passenger front airbag.
2. What are the possible causes of OBDII code B1354 GMC (Passenger Front Airbag Short to Ground)?
- The code B1354 can be triggered by a short to ground in the wiring harness, a faulty airbag module, or a defective passenger front airbag.
3. How serious is OBDII code B1354 GMC (Passenger Front Airbag Short to Ground)?
- This code indicates a fault in the passenger front airbag system, which could potentially affect the deployment of the airbag in the event of a collision. It is important to address this issue promptly for safety reasons.
4. Can I continue driving with OBDII code B1354 GMC (Passenger Front Airbag Short to Ground)?
- It is not recommended to continue driving with this code present, as it indicates a potential safety risk in the passenger front airbag system. It is advisable to have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose OBDII code B1354 GMC (Passenger Front Airbag Short to Ground)?
- Diagnosing this code typically involves using a scan tool to retrieve the specific fault code, inspecting the wiring harness for shorts, and testing the airbag module and passenger front airbag for faults.
6. What are some repair tips for fixing OBDII code B1354 GMC (Passenger Front Airbag Short to Ground)?
- Repair tips may include checking and repairing any damaged wiring, replacing the faulty airbag module or passenger front airbag, and clearing the code after the repairs are completed.
7. Can I reset OBDII code B1354 GMC (Passenger Front Airbag Short to Ground) without fixing the issue?
- While you can clear the code temporarily, it is not recommended to reset the code without addressing the underlying problem, as it may pose a safety risk in the event of an accident.
8. How much does it cost to repair OBDII code B1354 GMC (Passenger Front Airbag Short to Ground)?
- The cost of repairing this code can vary depending on the specific issue causing it. Costs may include diagnostic fees, replacement parts, and labor charges, so it is advisable to get a professional assessment.
9. Are there any recalls related to OBDII code B1354 GMC (Passenger Front Airbag Short to Ground)?
- It is recommended to check with the manufacturer or a GMC dealership to inquire about any recalls related to this specific OBDII code to see if your vehicle is affected.
10. How can I prevent OBDII code B1354 GMC (Passenger Front Airbag Short to Ground) from occurring again?
- Regular maintenance and inspections of the airbag system, prompt repairs of any related issues, and following manufacturer guidelines can help prevent the recurrence of this code.
Discuss the causes and fixes for B1354 GMC OBDII Code
Code B1354 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
