B1353 Cadillac Code - Passenger Front Airbag Resistance Too High
Quick Answer
When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself. Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1353 Cadillac indicates Passenger Front Airbag Resistance Too High.
- Common causes
- Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1353 Cadillac Description
Upon passing these test ignition and deployment loop voltages are measured to ensure that they are within their normal voltage ranges. The SDM monitors the voltages at the driver low and the passenger low to detect shorts to ground or voltage in the deploy loops.
The SDM checks the wiring connection to the passenger airbag module by letting the infinitesimal current flow through the internal circuit and verify the resistance.
What are the Possible Causes of the DTC B1353 Cadillac?
- Faulty Passenger Front Airbag
- Passenger Front Airbag harness is open or shorted
- Passenger Front Airbag circuit poor electrical connection
How to Fix the DTC B1353 Cadillac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1353 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1353 Cadillac code?
Need more information on how to fix the B1353 Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1353 Cadillac code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1353 Cadillac Code
1. What does the OBDII code B1353 mean on a Cadillac?
The code B1353 indicates that the resistance in the passenger front airbag circuit is too high, which could prevent the airbag from deploying properly in an accident.
2. What are the common symptoms of the B1353 code?
Common symptoms include an illuminated airbag warning light on the dashboard and the potential for the passenger front airbag to be disabled.
3. What causes the B1353 code to appear on a Cadillac?
The primary causes include a faulty passenger airbag, loose or corroded wiring or connectors in the airbag circuit, or a malfunctioning airbag control module.
4. Can I drive my Cadillac with the B1353 code active?
While the vehicle may still be drivable, the passenger airbag may not deploy in a crash, posing a safety risk. It’s recommended to address the issue promptly.
5. How can I diagnose the B1353 code on my Cadillac?
Use an OBDII scanner to confirm the code, then inspect the wiring harness, connectors, and the passenger airbag for damage or corrosion. A multimeter can help measure circuit resistance.
6. How is the B1353 code fixed?
Repairs may include replacing the passenger airbag, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the airbag control module.
7. How much does it cost to fix the B1353 code on a Cadillac?
Repair costs vary depending on the issue, but replacing an airbag can cost $500–$1,500, while fixing wiring or connectors may cost less.
8. Can I reset the B1353 code without fixing the problem?
Resetting the code without addressing the underlying issue will likely cause the code to return and may leave the airbag system inoperative.
9. What tools do I need to troubleshoot the B1353 code?
You’ll need an OBDII scanner, a multimeter to check resistance, and possibly a wiring diagram specific to your Cadillac model.
10. Could a dead battery trigger the B1353 code on a Cadillac?
A dead or weak battery typically won’t cause this code, but power fluctuations during starting could potentially affect airbag diagnostics. Verify the battery’s health as part of the troubleshooting process.
Discuss the causes and fixes for B1353 Cadillac OBDII Code
Code B1353 Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
