AutoCodes – KIA – B1326 KIA

B1326 KIA Code - Driver-Side Front Impact Sensor Short to Ground

Quick Answer

The detecting system for the front crash consists of the Supplemental Restraint System Control Module (SRSCM) and two Front Impact Sensors (FIS). Common causes include Faulty Driver-Side Front Impact Sensor (FIS), Driver-Side Front Impact Sensor harness is open or shorted, Driver-Side Front Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1326 KIA indicates Driver-Side Front Impact Sensor Short to Ground.
Common causes: Common causes include Faulty Driver-Side Front Impact Sensor (FIS), Driver-Side Front Impact Sensor harness is open or shorted, Driver-Side Front Impact Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,483

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 14, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1326 KIA Description

The detecting system for the front crash consists of the Supplemental Restraint System Control Module (SRSCM) and two Front Impact Sensors (FIS). The Front Impact Sensors are located at both sides of the front of the engine room. When FIS delivers collision signal to SRSCM, SRSCM checks if safing sensor located in SRSCM detects collusion, and if both FIS and the safing sensor detects collision simultaneously, SRSCM operates front airbag. The SRSCM sets the Diagnostic Trouble Code (DTC) (s) if it detects that any FIS is defective or there is a communication error between any FIS and the SRSCM.

OBDII Code B1326 KIA - Driver-Side Front Impact Sensor Short to Ground - AutoCodes.com — B1326 KIA Code - Driver-Side Front Impact Sensor Short to Ground

What does this mean?

What are the Possible Causes of the DTC B1326 KIA?

Faulty Driver-Side Front Impact Sensor (FIS)
Driver-Side Front Impact Sensor harness is open or shorted
Driver-Side Front Impact Sensor circuit poor electrical connection
Faulty Supplemental Restraint System Control Module (SRSCM)

How to Fix the DTC B1326 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1326 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1326 KIA code?

Need more information on how to fix the B1326 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1326 KIA code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1326 KIA Code

1. What are the common symptoms of OBDII code B1326 in a KIA related to the driver-side front impact sensor short to ground?

- Common symptoms include the airbag warning light staying illuminated on the dashboard and potential non-deployment of the driver-side airbag during a collision.

2. What are the possible causes of the driver-side front impact sensor short to ground in a KIA triggering OBDII code B1326?

- Causes may include damaged wiring, a faulty impact sensor, corrosion in the sensor's connectors, or issues with the airbag control module.

3. How can I diagnose the driver-side front impact sensor short to ground issue in my KIA when OBDII code B1326 is triggered?

- Diagnosis typically involves using a diagnostic scanner to retrieve the specific code, inspecting the wiring and connectors for damage, and testing the sensor's resistance.

4. What are the recommended repair tips for addressing OBDII code B1326 in a KIA due to a driver-side front impact sensor short to ground?

- Repair tips may include repairing or replacing damaged wiring, cleaning or replacing corroded connectors, replacing the faulty impact sensor, or reprogramming the airbag control module.

5. Is it safe to drive a KIA with OBDII code B1326 related to a driver-side front impact sensor short to ground?

- It is not recommended to drive the vehicle with this issue as it may affect the proper functioning of the driver-side airbag in the event of a collision.

6. Can resetting the OBDII code B1326 related to the driver-side front impact sensor short to ground in a KIA fix the problem?

- Resetting the code may temporarily turn off the warning light, but it will not resolve the underlying issue causing the short to ground in the sensor.

7. Are there any recalls or service bulletins related to OBDII code B1326 in KIA vehicles with a driver-side front impact sensor short to ground problem?

- It is advisable to check with a KIA dealership or the manufacturer's website for any recalls or service bulletins specific to this issue in your vehicle.

8. How much does it typically cost to repair OBDII code B1326 in a KIA caused by a driver-side front impact sensor short to ground?

- The cost of repairs can vary depending on the specific cause of the issue, but it may range from a couple of hundred dollars to over a thousand dollars, including parts and labor.

9. Can a DIY enthusiast with automotive experience fix the driver-side front impact sensor short to ground issue triggering OBDII code B1326 in a KIA?

- While some basic troubleshooting and repairs can be done by DIY enthusiasts, working with airbag systems requires specialized knowledge and tools, so it is recommended to seek professional help for this issue.

10. How long does it typically take to repair OBDII code B1326 in a KIA related to a driver-side front impact sensor short to ground?

- The repair time can vary depending on the extent of the damage and the availability of parts, but it may take a few hours to a full day for a qualified technician to diagnose and fix the issue.