AutoCodes – Jeep – B1299 Jeep

B1299 Jeep Code - Park Assist Sensor 12

Quick Answer

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. Common causes include Faulty Park Assist Sensor 12, Park Assist Sensor 12 harness is open or shorted, Park Assist Sensor 12 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: B1299 Jeep indicates Park Assist Sensor 12.
Common causes: Common causes include Faulty Park Assist Sensor 12, Park Assist Sensor 12 harness is open or shorted, Park Assist Sensor 12 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,298

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1299 Jeep Description

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return the circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit. The Park Assist Module monitors the PTS Sensor when the vehicle in reverse and during the self-test while the vehicle is in drive between 18 km/h (11 mph) and 40 km/h (25 mph). The Park Assist Module sets the OBDII code when the Park Assist Sensor Signal circuit is not to factory specifications.

OBDII Code B1299 Jeep - Park Assist Sensor 12 - AutoCodes.com — B1299 Jeep Code - Park Assist Sensor 12

What does this mean?

What are the Possible Causes of the DTC B1299 Jeep?

Faulty Park Assist Sensor 12
Park Assist Sensor 12 harness is open or shorted
Park Assist Sensor 12 circuit poor electrical connection
Faulty Park Assist Module

How to Fix the DTC B1299 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1299-11 PTS SENSOR 12 CIRCUIT SHORT TO GROUND
B1299-12 PTS SENSOR 12 CIRCUIT SHORT TO BATTERY
B1299-25 PTS SENSOR 12 SIGNAL SHAPE / WAVEFORM FAILURE
B1299-92 PTS SENSOR 12 PERFORMANCE OR INCORRECT OPERATION

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1299 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1299 Jeep code?

Need more information on how to fix the B1299 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1299 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1299 Jeep Code

1. What does OBDII code B1299 for Jeep Park Assist Sensor 12 indicate?

The code B1299 refers to a fault in Park Assist Sensor 12, indicating a problem with the corresponding sensor's operation.

2. What are the common symptoms of a B1299 Jeep code?

Common symptoms include the malfunction of Park Assist Sensor 12, leading to inaccurate or non-functional parking assistance features in your Jeep.

3. What are the possible causes of the B1299 code in a Jeep?

The B1299 code in a Jeep can be triggered by issues such as a faulty Park Assist Sensor 12, damaged wiring related to the sensor, or a communication error within the park assist system.

4. How can I diagnose the B1299 Jeep code?

Diagnosing the B1299 code involves using an OBDII scanner to retrieve the code, inspecting Park Assist Sensor 12 and its wiring for any visible damage, and performing a system reset to see if the issue persists.

5. Can I still drive my Jeep with the B1299 fault code?

While driving with the B1299 code may not directly impact the vehicle's drivability, it is recommended to address the issue promptly to ensure the proper functioning of the park assist system.

6. How can I repair the B1299 fault code in my Jeep?

Repairing the B1299 code may involve replacing Park Assist Sensor 12 if it is found to be faulty, repairing any damaged wiring, or resetting the system to clear the code.

7. Is it possible to reset the B1299 code without repairs?

In some cases, resetting the system using an OBDII scanner may temporarily clear the B1299 code, but it is important to address the root cause of the issue to prevent future occurrences.

8. Can extreme weather conditions trigger the B1299 code in a Jeep?

Extreme weather conditions such as heavy rain or snow may impact the operation of Park Assist Sensor 12 and could potentially trigger the B1299 fault code.

9. How much does it typically cost to repair the B1299 fault in a Jeep?

The cost of repairing the B1299 fault can vary depending on the extent of the issue, but it may involve sensor replacement, which could range from $100 to $300, including labor costs.

10. Are there any preventive maintenance tips to avoid the B1299 fault in my Jeep?

Regularly inspecting the park assist sensors, keeping them clean from debris, and addressing any issues promptly can help prevent the occurrence of the B1299 fault in your Jeep.