AutoCodes – Jeep – B1297 Jeep

B1297 Jeep Code - Park Assist Sensor 10

Quick Answer

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. Common causes include Faulty Park Assist Sensor 10, Park Assist Sensor 10 harness is open or shorted, Park Assist Sensor 10 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: B1297 Jeep indicates Park Assist Sensor 10.
Common causes: Common causes include Faulty Park Assist Sensor 10, Park Assist Sensor 10 harness is open or shorted, Park Assist Sensor 10 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,851

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1297 Jeep Description

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return the circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit. The Park Assist Module monitors the PTS Sensor when the vehicle in reverse and during the self-test while the vehicle is in drive between 18 km/h (11 mph) and 40 km/h (25 mph). The Park Assist Module sets the OBDII code when the Park Assist Sensor Signal circuit is not to factory specifications.

OBDII Code B1297 Jeep - Park Assist Sensor 10 - AutoCodes.com — B1297 Jeep Code - Park Assist Sensor 10

What does this mean?

What are the Possible Causes of the DTC B1297 Jeep?

Faulty Park Assist Sensor 10
Park Assist Sensor 10 harness is open or shorted
Park Assist Sensor 10 circuit poor electrical connection
Faulty Park Assist Module

How to Fix the DTC B1297 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1297-11 PTS SENSOR 10 CIRCUIT SHORT TO GROUND
B1297-12 PTS SENSOR 10 CIRCUIT SHORT TO BATTERY
B1297-25 PTS SENSOR 10 SIGNAL SHAPE / WAVEFORM FAILURE
B1297-92 PTS SENSOR 10 PERFORMANCE OR INCORRECT OPERATION

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1297 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1297 Jeep code?

Need more information on how to fix the B1297 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1297 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1297 Jeep Code

1. What does OBDII code B1297 for a Jeep Park Assist Sensor 10 indicate?

- OBDII code B1297 indicates a fault with Park Assist Sensor 10 in the Jeep's system.

2. What are common symptoms of a Park Assist Sensor 10 issue in a Jeep?

- Common symptoms include the park assist system not working properly, error messages on the dashboard, and warning sounds not activating.

3. What are possible causes of OBDII code B1297 in a Jeep related to Park Assist Sensor 10?

- Possible causes may include a faulty park assist sensor, wiring issues, sensor calibration problems, or a malfunction in the park assist control module.

4. How can I diagnose a Park Assist Sensor 10 problem in my Jeep?

- Diagnosing the issue typically involves using an OBDII scanner to read the specific code, visually inspecting the sensor and related wiring, and conducting sensor tests as per the manufacturer's guidelines.

5. Can I still drive my Jeep with an active B1297 code for Park Assist Sensor 10?

- While it may be safe to drive, it is recommended to address the issue promptly to ensure the proper functioning of the park assist system.

6. How can I reset the B1297 code for Park Assist Sensor 10 in my Jeep?

- Resetting the code can be done using an OBDII scanner by clearing the code after the underlying issue has been identified and resolved.

7. Is it possible to repair a Park Assist Sensor 10 problem in a Jeep at home?

- Depending on the specific issue, some repairs related to the park assist sensor can be done at home, such as replacing a faulty sensor or addressing simple wiring problems.

8. What should I do if the B1297 code keeps coming back in my Jeep after repairs?

- If the code persists after repairs, it may indicate an ongoing issue that needs further diagnosis by a professional mechanic with specialized diagnostic equipment.

9. How much does it typically cost to repair a Park Assist Sensor 10 problem in a Jeep?

- The cost of repair can vary based on the specific issue, parts needed, and labor rates, but it is recommended to get estimates from local mechanics or dealerships.

10. Can a Park Assist Sensor 10 issue in a Jeep affect other systems in the vehicle?

- While the park assist sensor is a standalone system, if left unresolved, it could potentially impact other related systems or safety features in the vehicle.