AutoCodes – Jeep – B1295 Jeep

B1295 Jeep Code - Park Assist Sensor 8

Quick Answer

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. Common causes include Faulty Park Assist Sensor 8, Park Assist Sensor 8 harness is open or shorted, Park Assist Sensor 8 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: B1295 Jeep indicates Park Assist Sensor 8.
Common causes: Common causes include Faulty Park Assist Sensor 8, Park Assist Sensor 8 harness is open or shorted, Park Assist Sensor 8 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,794

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1295 Jeep Description

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return the circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit. The Park Assist Module monitors the PTS Sensor when the vehicle in reverse and during the self-test while the vehicle is in drive between 18 km/h (11 mph) and 40 km/h (25 mph). The Park Assist Module sets the OBDII code when the Park Assist Sensor Signal circuit is not to factory specifications.

OBDII Code B1295 Jeep - Park Assist Sensor 8 - AutoCodes.com — B1295 Jeep Code - Park Assist Sensor 8

What does this mean?

What are the Possible Causes of the DTC B1295 Jeep?

Faulty Park Assist Sensor 8
Park Assist Sensor 8 harness is open or shorted
Park Assist Sensor 8 circuit poor electrical connection
Faulty Park Assist Module

How to Fix the DTC B1295 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1295-11 PTS SENSOR 8 CIRCUIT SHORT TO GROUND
B1295-12 PTS SENSOR 8 CIRCUIT SHORT TO BATTERY
B1295-25 PTS SENSOR 8 SIGNAL SHAPE / WAVEFORM FAILURE
B1295-92 PTS SENSOR 8 PERFORMANCE OR INCORRECT OPERATION

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1295 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1295 Jeep code?

Need more information on how to fix the B1295 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1295 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1295 Jeep Code

1. What does OBDII code B1295 for a Jeep Park Assist Sensor 8 indicate?

This code indicates a fault with Park Assist Sensor 8 in the Jeep's system.

2. What are common symptoms of OBDII code B1295 in a Jeep?

Common symptoms include the malfunction of Park Assist Sensor 8, leading to inaccurate or failed parking assist functionality.

3. What are possible causes of OBDII code B1295 in a Jeep?

Causes can include sensor wiring issues, sensor damage, or a malfunction within the park assist system.

4. How can I diagnose OBDII code B1295 related to Park Assist Sensor 8 in my Jeep?

Diagnosis typically involves checking the wiring and connection to Park Assist Sensor 8, as well as using a diagnostic scanner to read the specific fault code.

5. Can OBDII code B1295 in a Jeep be fixed easily?

Depending on the cause, the issue may be resolved by repairing or replacing the faulty Park Assist Sensor 8 or addressing wiring issues.

6. Is it safe to continue driving with OBDII code B1295 present in a Jeep?

While the vehicle may still be operable, it's recommended to address the issue promptly to ensure the proper functioning of the park assist system.

7. Are there any DIY repair tips for OBDII code B1295 in a Jeep?

DIY enthusiasts with the necessary tools and knowledge may attempt to replace Park Assist Sensor 8 or check and repair wiring connections themselves.

8. Can weather conditions affect the triggering of OBDII code B1295 in a Jeep?

Extreme weather conditions, such as heavy rain or snow, could potentially impact the performance of the park assist sensors and trigger this code.

9. How much does it typically cost to repair OBDII code B1295 for a Jeep Park Assist Sensor 8?

Costs can vary based on the specific issue, but it may involve expenses for parts and labor, potentially ranging from a few hundred to over a thousand dollars.

10. Will resetting the OBDII system clear the B1295 code in a Jeep?

Resetting the system may temporarily clear the code, but if the underlying issue with Park Assist Sensor 8 is not addressed, the code is likely to reappear.