B1293 Chrysler Code - Park Assist Sensor 6
Quick Answer
The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. Common causes include Faulty Park Assist Sensor 6, Park Assist Sensor 6 harness is open or shorted, Park Assist Sensor 6 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- B1293 Chrysler indicates Park Assist Sensor 6.
- Common causes
- Common causes include Faulty Park Assist Sensor 6, Park Assist Sensor 6 harness is open or shorted, Park Assist Sensor 6 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code B1293 Chrysler Description
What are the Possible Causes of the DTC B1293 Chrysler?
- Faulty Park Assist Sensor 6
- Park Assist Sensor 6 harness is open or shorted
- Park Assist Sensor 6 circuit poor electrical connection
- Faulty Park Assist Module
How to Fix the DTC B1293 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1293-12 PTS SENSOR 6 CIRCUIT SHORT TO BATTERY
B1293-25 PTS SENSOR 6 SIGNAL SHAPE / WAVEFORM FAILURE
B1293-92 PTS SENSOR 6 PERFORMANCE OR INCORRECT OPERATION
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1293 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1293 Chrysler code?
Need more information on how to fix the B1293 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1293 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1293 Chrysler Code
1. What does OBDII code B1293 Chrysler indicate?
Code B1293 specifically refers to an issue with Park Assist Sensor 6 in the Chrysler vehicle's system.
2. What are the common symptoms of a B1293 fault?
Common symptoms include a non-functioning or erratic behavior of Park Assist Sensor 6, leading to inaccurate distance readings or beeping alerts.
3. What are the possible causes of OBDII code B1293 in a Chrysler?
Causes may include a faulty Park Assist Sensor 6, damaged wiring or connectors related to the sensor, or issues with the control module.
4. How can I diagnose a B1293 fault in my Chrysler?
Diagnosing involves visually inspecting the Park Assist Sensor 6, checking the wiring and connectors for any damage, and using a diagnostic scanner to read the fault code.
5. Can I repair a B1293 fault myself?
Depending on the cause, you may be able to replace the faulty Park Assist Sensor 6 or repair damaged wiring yourself. However, advanced diagnosis and repairs may require professional assistance.
6. Are there any quick tips to troubleshoot a B1293 fault before seeking professional help?
You can try cleaning the Park Assist Sensor 6 and its surrounding area to ensure dirt or debris are not causing the issue before seeking professional help.
7. Is it safe to continue driving with an unresolved B1293 fault?
While your vehicle may still be operable with a B1293 fault, it's recommended to address the issue promptly to ensure the Park Assist system functions correctly for your safety and the safety of others.
8. Does fixing a B1293 fault require resetting the OBDII system in a Chrysler?
Once the underlying issue causing the B1293 fault is resolved, clearing the fault code from the OBDII system can be done using a diagnostic scanner to ensure the system recognizes the repair.
9. Can extreme weather conditions affect the performance of Park Assist Sensor 6 and trigger a B1293 fault?
Yes, extreme weather conditions such as heavy rain, snow, or extreme temperatures can impact the performance of the sensor and potentially lead to a B1293 fault.
10. How can I prevent future B1293 faults in my Chrysler's Park Assist System?
Regularly inspecting and maintaining the Park Assist sensors, keeping them clean, and addressing any issues promptly can help prevent future B1293 faults from occurring in your Chrysler.
Discuss the causes and fixes for B1293 Chrysler OBDII Code
Code B1293 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.