B1288 Code - Video Display Mode Control Signal
Quick Answer
The radio can control the video display mode on vehicles equipped with Rear Seat Entertainment (RSE) video. Common causes include Faulty Video Display, Video Display harness is open or shorted, Video Display circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B1288 indicates Video Display Mode Control Signal.
- Common causes
- Common causes include Faulty Video Display, Video Display harness is open or shorted, Video Display circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B1288 Description
What are the Possible Causes of the DTC B1288?
- Faulty Video Display
- Video Display harness is open or shorted
- Video Display circuit poor electrical connection
How to Fix the DTC B1288?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
DTC B1288 02 Video Display Mode Control Signal Short to Ground
DTC B1288 04 Video Display Mode Control Signal Open Circuit
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1288 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1288 code?
Need more information on how to fix the B1288 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1288 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1288 Buick — Video Display Mode Control Signal
- B1288 Cadillac — Video Display Mode Control Signal
- B1288 Chevrolet — Video Display Mode Control Signal
- B1288 Ford — Rear Lock Motor Common Circuit General Signal Failure
- B1288 GMC — Video Display Mode Control Signal
- B1288 Lincoln — Rear Lock Motor Common Circuit General Signal Failure
- B1288 Mercury — Rear Lock Motor Common Circuit General Signal Failure
Frequently Asked Questions about B1288 Code
1. What are the common symptoms of OBDII code B1288 (Video Display Mode Control Signal)?
The common symptoms of code B1288 include a malfunctioning video display, flickering or distorted images on the display screen, and the inability to switch display modes.
2. What are the possible causes of OBDII code B1288?
Possible causes of code B1288 include a faulty video display control module, damaged wiring or connectors related to the video display system, or a communication error between the control module and the video display.
3. How can I diagnose OBDII code B1288?
Diagnosing code B1288 typically involves using a scan tool to retrieve the code, inspecting the video display system for any visible damage, and testing the control module and related components for proper functionality.
4. Can OBDII code B1288 be repaired at home?
Repairing code B1288 may require professional diagnosis and repair, especially if it involves complex electronic components. However, checking for loose connections, damaged wiring, or blown fuses can be attempted at home.
5. Is it safe to continue driving with OBDII code B1288 present?
It is generally not recommended to continue driving with code B1288 active, as it can affect the functionality of the video display system and potentially lead to further issues. It's best to address the problem promptly.
6. How much does it typically cost to repair OBDII code B1288?
The cost of repairing code B1288 can vary depending on the specific cause of the issue, the extent of the damage, and the labor rates of the repair facility. It's advisable to obtain a few quotes from different mechanics.
7. Can a malfunctioning fuse cause OBDII code B1288 to appear?
Yes, a blown fuse related to the video display system can lead to code B1288 being triggered. Checking and replacing any faulty fuses should be part of the diagnostic process.
8. Are there any common DIY fixes for OBDII code B1288?
Some DIY fixes for code B1288 include checking and cleaning the connectors in the video display system, resetting the control module, and ensuring all related components are securely connected.
9. Will disconnecting the vehicle's battery reset OBDII code B1288?
Disconnecting the battery may temporarily reset the code, but if the underlying issue is not addressed, the code is likely to reappear once the vehicle is driven again. It's important to diagnose and fix the root cause.
10. How long does it typically take to repair OBDII code B1288?
The repair time for code B1288 can vary depending on the complexity of the issue and the availability of parts. In some cases, it can be resolved quickly, while more involved repairs may take longer.
Discuss the causes and fixes for B1288 OBDII Code
Code B1288 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
