AutoCodes – Dodge – B1238 Dodge

B1238 Dodge Code - PTS Sensor 9 Ring Time Too Short

Quick Answer

The Park Assist Module monitors the Park Assist (PTS) Sensor #9. Common causes include Faulty Park Assist (PTS) Sensor #9, Park Assist (PTS) Sensor #9 harness is open or shorted, Park Assist (PTS) Sensor #9 circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
B1238 Dodge indicates PTS Sensor 9 Ring Time Too Short.
Common causes
Common causes include Faulty Park Assist (PTS) Sensor #9, Park Assist (PTS) Sensor #9 harness is open or shorted, Park Assist (PTS) Sensor #9 circuit poor electrical connection.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,459
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 19, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B1238 Dodge Description

The Park Assist Module monitors the Park Assist (PTS) Sensor #9. The Park Assist Module sets the OBDII code when the Park Assist (PTS) Sensor #9 is not to factory specifications.
OBDII Code B1238 Dodge - PTS Sensor 9 Ring Time Too Short - AutoCodes.com
B1238 Dodge Code - PTS Sensor 9 Ring Time Too Short

What are the Possible Causes of the DTC B1238 Dodge?

  • Faulty Park Assist (PTS) Sensor #9
  • Park Assist (PTS) Sensor #9 harness is open or shorted
  • Park Assist (PTS) Sensor #9 circuit poor electrical connection
  • Faulty Park Assist Module

How to Fix the DTC B1238 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1238 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1238 Dodge code?

Need more information on how to fix the B1238 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1238 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1238 Dodge Code

1. What are the common symptoms of OBDII code B1238 in a Dodge, indicating the PTS Sensor 9 Ring Time Too Short issue?

- Common symptoms include difficulty starting the vehicle, stalling, and erratic engine performance.

2. What are the potential causes of OBDII code B1238 in a Dodge related to the PTS Sensor 9 Ring Time Too Short error?

- Possible causes may include a faulty PTS sensor, wiring issues, or a malfunctioning PCM (Powertrain Control Module).

3. How can I diagnose the OBDII code B1238 in a Dodge to confirm the PTS Sensor 9 Ring Time Too Short problem?

- Diagnosing the issue typically involves using a diagnostic scanner to retrieve the specific fault code and then conducting further testing on the PTS sensor and related components.

4. What are some basic repair tips for addressing the OBDII code B1238 in a Dodge with the PTS Sensor 9 Ring Time Too Short fault?

- Repair tips may involve checking and repairing any damaged wiring, replacing the faulty PTS sensor, or reprogramming the PCM if necessary.

5. Is it safe to continue driving my Dodge with the OBDII code B1238 indicating the PTS Sensor 9 Ring Time Too Short issue?

- It is not recommended to drive the vehicle with this fault, as it can lead to potential stalling or other serious drivability issues.

6. Can I reset the OBDII code B1238 in my Dodge to see if the PTS Sensor 9 Ring Time Too Short problem clears on its own?

- While you can reset the code temporarily, it is important to address the underlying issue causing the fault code to prevent further problems.

7. How much does it typically cost to repair the OBDII code B1238 in a Dodge caused by the PTS Sensor 9 Ring Time Too Short fault?

- The cost of repair can vary depending on the specific cause of the issue, but it may involve a few hundred dollars for parts and labor.

8. Are there any recalls or technical service bulletins (TSBs) related to the OBDII code B1238 in Dodge vehicles with the PTS Sensor 9 Ring Time Too Short error?

- It is recommended to check with your local Dodge dealership or online resources for any relevant recalls or TSBs related to this specific fault code.

9. Can a DIY enthusiast with basic mechanical skills repair the OBDII code B1238 in a Dodge related to the PTS Sensor 9 Ring Time Too Short issue?

- While some repairs may be possible for DIY enthusiasts, diagnosing and repairing issues related to the PTS sensor and PCM may require specialized tools and expertise.

10. How often does the OBDII code B1238 occur in Dodge vehicles due to the PTS Sensor 9 Ring Time Too Short issue?

- The frequency of this specific fault may vary, but it is not uncommon in Dodge vehicles with PTS sensor-related issues.

Discuss the causes and fixes for B1238 Dodge OBDII Code

Code B1238 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play