AutoCodes – Nissan – B1210 Nissan

B1210 Nissan Code - Side Collision Detection

Quick Answer

Detects component damage resulting from a side collision, brinks or illuminates the air bag warning lamp to inform the driver. Common causes include Faulty Air Bag Diagnosis Sensor Unit (ACU), Air Bag Diagnosis Sensor Unit (ACU) harness is open or shorted, Air Bag Diagnosis Sensor Unit (ACU) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1210 Nissan indicates Side Collision Detection.
Common causes: Common causes include Faulty Air Bag Diagnosis Sensor Unit (ACU), Air Bag Diagnosis Sensor Unit (ACU) harness is open or shorted, Air Bag Diagnosis Sensor Unit (ACU) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,932

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1210 Nissan Description

Detects component damage resulting from a side collision, brinks or illuminates the air bag warning lamp to inform the driver.
The side air bag and curtain air bag are operated by the decision of the Air Bag Diagnosis Sensor Unit (ACU) signal of the side collision.
The Side Collision Detection consists of the satellite sensor, Air Bag Diagnosis Sensor Unit (ACU), front side air bag and side curtain air bag.

OBDII Code B1210 Nissan - Side Collision Detection - AutoCodes.com — B1210 Nissan Code - Side Collision Detection

What does this mean?

What are the Possible Causes of the DTC B1210 Nissan?

Faulty Air Bag Diagnosis Sensor Unit (ACU)
Air Bag Diagnosis Sensor Unit (ACU) harness is open or shorted
Air Bag Diagnosis Sensor Unit (ACU) circuit poor electrical connection

How to Fix the DTC B1210 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

After a side collision, all the deployed components and the Air Bag Diagnosis Sensor Unit (ACU) must need to be replaced. If there is no collision, then the problem is with the Air Bag Diagnosis Sensor Unit (ACU)

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1210 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1210 Nissan code?

Need more information on how to fix the B1210 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1210 Nissan code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1210 Nissan Code

1. What is OBDII code B1210 for Nissan related to Side Collision Detection?

The B1210 code in Nissan vehicles is related to the side collision detection system, indicating a fault in the system's operation.

2. What are common symptoms of OBDII code B1210 in a Nissan?

Common symptoms of code B1210 may include the side collision detection system not functioning properly, warning lights on the dashboard, or diagnostic trouble codes being stored.

3. What are possible causes of OBDII code B1210 in a Nissan?

Potential causes of code B1210 can include wiring issues, faulty sensors, damaged components in the side collision detection system, or a malfunction in the control module.

4. How can I diagnose OBDII code B1210 in my Nissan?

Diagnosing code B1210 typically involves using a professional OBDII scanner to retrieve the specific fault code and then performing a thorough inspection of the side collision detection system components for any visible damage or issues.

5. Can I repair OBDII code B1210 in my Nissan myself?

Repairing code B1210 may require advanced automotive diagnostic and repair skills, as it involves troubleshooting electrical components and potentially replacing sensors or modules. It is recommended to seek assistance from a qualified mechanic or dealership.

6. Is it safe to drive my Nissan with OBDII code B1210 present?

It is not recommended to drive your vehicle with an active fault code like B1210, as it may indicate a critical issue with the side collision detection system that could compromise safety in the event of a collision.

7. How much does it cost to fix OBDII code B1210 in a Nissan?

The cost of repairing code B1210 can vary depending on the specific cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain a professional diagnosis to determine an accurate repair estimate.

8. Can a disconnected or dead battery trigger OBDII code B1210 in a Nissan?

A disconnected or dead battery can sometimes cause the side collision detection system to lose its calibration or memory settings, which may trigger fault code B1210. Reconnecting the battery and performing system recalibration may resolve the issue.

9. Will clearing the OBDII code B1210 in my Nissan reset the side collision detection system?

Clearing the fault code B1210 may temporarily reset the warning lights, but it will not fix the underlying issue causing the fault. Proper diagnosis and repair are necessary to ensure the side collision detection system functions correctly.

10. How often should I have the side collision detection system in my Nissan checked for potential issues related to OBDII code B1210?

Regular maintenance checks and inspections of the side collision detection system, especially after any collision or impact, can help prevent issues like code B1210 from occurring. It is also advisable to address any warning lights or abnormal system behavior promptly.