B1193 Ford Code - Crash Event Storage Full and Locked No Sub Type Information
Quick Answer
The Restraint Control Module (RCM) detected that the vehicle has been in a crash and sets the OBDII code. Common causes include Faulty Restraint Control Module (RCM), Restraint Control Module (RCM) harness is open or shorted, Restraint Control Module (RCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1193 Ford indicates Crash Event Storage Full and Locked No Sub Type Information.
- Common causes
- Common causes include Faulty Restraint Control Module (RCM), Restraint Control Module (RCM) harness is open or shorted, Restraint Control Module (RCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1193 Ford Description
What are the Possible Causes of the DTC B1193 Ford?
- Faulty Restraint Control Module (RCM)
- Restraint Control Module (RCM) harness is open or shorted
- Restraint Control Module (RCM) circuit poor electrical connection
How to Fix the DTC B1193 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1193 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1193 Ford code?
Need more information on how to fix the B1193 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1193 Ford code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1193 Ford Code
1. What are the common symptoms of OBDII code B1193 Ford?
The common symptoms of code B1193 include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system.
2. What does the OBDII code B1193 Ford indicate?
OBDII code B1193 indicates that the crash event storage in the airbag control module is full and locked, with no sub-type information available.
3. What are the possible causes of OBDII code B1193 Ford?
Possible causes of code B1193 include a history of multiple crash events triggering the airbag system, a malfunction in the airbag control module, or a fault in the crash sensor.
4. How can I diagnose the OBDII code B1193 Ford?
Diagnosing code B1193 typically involves using a diagnostic scanner compatible with Ford vehicles to retrieve the specific fault codes from the airbag control module.
5. Is it safe to drive with OBDII code B1193 Ford present?
It is not recommended to drive with the B1193 code active, as it indicates potential issues with the airbag system's crash event storage, which could compromise safety in the event of an accident.
6. Can I reset the OBDII code B1193 Ford on my own?
Resetting the B1193 code may require specialized tools and knowledge of airbag systems. It is advisable to have the issue diagnosed and repaired by a qualified technician.
7. How can I repair OBDII code B1193 Ford?
Repairing code B1193 may involve clearing the crash event storage in the airbag control module, addressing any underlying issues with the airbag system, and resetting the code using a diagnostic tool.
8. Are there any safety precautions to take when dealing with OBDII code B1193 Ford?
When working on the airbag system related to code B1193, it is crucial to disconnect the vehicle's battery and wait for a specified time to avoid accidental deployment of the airbags.
9. Can OBDII code B1193 Ford be a recurring issue?
If the root cause of code B1193, such as a faulty crash sensor or airbag module, is not properly addressed, the issue may recur even after resetting the code.
10. Is professional help necessary to fix OBDII code B1193 Ford?
Due to the complexity and safety implications of airbag systems, it is highly recommended to seek professional help from a certified mechanic or dealership to diagnose and repair code B1193.
Discuss the causes and fixes for B1193 Ford OBDII Code
Code B1193 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
