AutoCodesScion – B1159 Scion

B1159 Scion Code - Front Airbag Sensor LH Malfunction

Quick Answer

The Front Airbag Sensor (Left Side) circuit consists of the Airbag Sensor Assembly and Front Airbag Sensor LH. Common causes include Faulty Front Airbag Sensor (Left Side), Front Airbag Sensor harness is open or shorted, Front Airbag Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B1159 Scion indicates Front Airbag Sensor LH Malfunction.
Common causes
Common causes include Faulty Front Airbag Sensor (Left Side), Front Airbag Sensor harness is open or shorted, Front Airbag Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 849
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 19, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1159 Scion Description

The Front Airbag Sensor (Left Side) circuit consists of the Airbag Sensor Assembly and Front Airbag Sensor LH. The Diagnostic Trouble Code (DTC) B1159 is recorded when a malfunction is detected in the Front Airbag Sensor LH circuit.
OBDII Code B1159 Scion - Front Airbag Sensor LH Malfunction - AutoCodes.com
B1159 Scion Code - Front Airbag Sensor LH Malfunction

What are the Possible Causes of the DTC B1159 Scion?

  • Faulty Front Airbag Sensor (Left Side)
  • Front Airbag Sensor harness is open or shorted
  • Front Airbag Sensor circuit poor electrical connection
  • Faulty Airbag Sensor Assembly

How to Fix the DTC B1159 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1159 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1159 Scion code?

Need more information on how to fix the B1159 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1159 Scion code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1159 Scion Code

1. What are the common symptoms of OBDII code B1159 in a Scion related to the Front Airbag Sensor LH Malfunction?

- The common symptoms include the airbag warning light illuminating on the dashboard and a potential failure of the LH front airbag system.

2. What are the possible causes of OBDII code B1159 in a Scion?

- The code B1159 in a Scion is typically triggered by a malfunction in the LH (left-hand) front airbag sensor, which could be due to wiring issues, sensor damage, or a faulty airbag control module.

3. How can I diagnose the Front Airbag Sensor LH Malfunction in my Scion when OBDII code B1159 is present?

- Diagnosis involves inspecting the LH front airbag sensor for physical damage, checking the wiring for any faults, and using a diagnostic scanner to read and clear the code for testing purposes.

4. Is it safe to drive my Scion with OBDII code B1159 indicating a Front Airbag Sensor LH Malfunction?

- It is not recommended to drive the vehicle with a malfunctioning front airbag sensor, as it can compromise the effectiveness of the airbag system in the event of a collision.

5. Can I reset OBDII code B1159 related to the Front Airbag Sensor LH Malfunction in my Scion without fixing the issue?

- While you can reset the code temporarily, it will likely reappear until the underlying problem with the LH front airbag sensor is properly diagnosed and repaired.

6. How much does it typically cost to repair the Front Airbag Sensor LH Malfunction in a Scion triggering OBDII code B1159?

- The cost of repair can vary depending on the exact cause of the malfunction, but it may involve replacing the LH front airbag sensor, repairing damaged wiring, or reprogramming the airbag control module. Costs can range from a few hundred to over a thousand dollars.

7. Are there any DIY repair tips for addressing OBDII code B1159 in a Scion due to a Front Airbag Sensor LH Malfunction?

- DIY repairs for this issue are not recommended due to the critical nature of the airbag system. It is best to have a qualified mechanic or technician diagnose and repair the problem to ensure proper functionality and safety.

8. Will fixing OBDII code B1159 in my Scion resolve any other airbag-related issues?

- Fixing the LH front airbag sensor malfunction indicated by code B1159 should address the specific issue related to that sensor. However, it's essential to have the entire airbag system inspected to ensure overall functionality and safety.

9. Can a Front Airbag Sensor LH Malfunction in a Scion triggering OBDII code B1159 be caused by a simple loose connection?

- Yes, a loose or poor connection at the LH front airbag sensor can indeed trigger the code B1159. It is recommended to check all connections and wiring before proceeding with more extensive repairs.

10. How long does it typically take to repair the Front Airbag Sensor LH Malfunction in a Scion associated with OBDII code B1159?

- The repair time can vary based on the exact cause of the malfunction and the extent of the repair needed. It may take a few hours to a full day for a mechanic to diagnose, fix, and test the LH front airbag sensor issue.

Discuss the causes and fixes for B1159 Scion OBDII Code

Code B1159 Scion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play