B1148 GMC Code - Passenger Side Air Bag System Malfunction
Quick Answer
When the ignition switch is turned to RUN position, Side Impact Sensing Module (SISM) will perform tests to diagnose critical internal malfunctions. Common causes include Faulty Passenger Side Air Bag, Passenger Side Air Bag harness is open or shorted, Passenger Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1148 GMC indicates Passenger Side Air Bag System Malfunction.
- Common causes
- Common causes include Faulty Passenger Side Air Bag, Passenger Side Air Bag harness is open or shorted, Passenger Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1148 GMC Description
What are the Possible Causes of the DTC B1148 GMC?
- Faulty Passenger Side Air Bag
- Passenger Side Air Bag harness is open or shorted
- Passenger Side Air Bag circuit poor electrical connection
- Faulty Side Impact Sensing Module (SISM)
- Faulty Sensing and Diagnostic Module (SDM)
How to Fix the DTC B1148 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1148 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1148 GMC code?
Need more information on how to fix the B1148 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1148 GMC code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1148 GMC Code
1. What are common symptoms of OBDII code B1148 GMC (Passenger Side Air Bag System Malfunction)?
- The common symptoms include the airbag warning light illuminating on the dashboard and a message indicating a passenger side airbag system issue.
2. What are possible causes of OBDII code B1148 GMC?
- The code B1148 GMC can be triggered by a faulty passenger side airbag sensor, damaged wiring, or a malfunctioning airbag control module.
3. How can I diagnose the cause of OBDII code B1148 GMC?
- To diagnose the issue, a professional diagnostic scan tool can be used to read the specific fault codes and pinpoint the exact cause of the passenger side airbag system malfunction.
4. Can I still drive my vehicle with OBDII code B1148 GMC?
- It is not recommended to drive the vehicle with a malfunctioning airbag system, as it compromises passenger safety in the event of a collision. Prompt repair is advised.
5. How can I repair OBDII code B1148 GMC?
- Repairing the code B1148 GMC typically involves replacing the faulty passenger side airbag sensor, repairing damaged wiring, or reprogramming the airbag control module as necessary.
6. Is it safe to reset the OBDII code B1148 GMC without fixing the underlying issue?
- Resetting the code without addressing the root cause can temporarily turn off the warning light, but the underlying issue with the passenger side airbag system will persist, compromising safety.
7. Can a DIY enthusiast fix OBDII code B1148 GMC at home?
- While some basic troubleshooting like checking wiring connections can be done at home, diagnosing and repairing the passenger side airbag system issue may require specialized tools and expertise.
8. How much does it typically cost to repair OBDII code B1148 GMC?
- The cost of repairing OBDII code B1148 GMC can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars at a dealership or repair shop.
9. Are there any recalls or technical service bulletins related to OBDII code B1148 GMC?
- It is recommended to check with a GMC dealership or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or bulletins related to this specific OBDII code.
10. How can I prevent OBDII code B1148 GMC from recurring in the future?
- Regular maintenance checks, prompt repairs of any airbag system issues, and careful handling of the vehicle's interior components can help prevent the recurrence of OBDII code B1148 GMC.
Discuss the causes and fixes for B1148 GMC OBDII Code
Code B1148 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
