AutoCodes – Lincoln – B1123 Lincoln

B1123 Lincoln Code - Restraints Ignition Relay

Quick Answer

The Battery Energy Control Module (BECMB) provides battery voltage to the Restraints Control Module (RCM) and, if equipped, Passenger Airbag Deactivation (PAD) indicator (vehicles without center stack display only). Common causes include Faulty Restraints Ignition Relay, Restraints Ignition Relay harness is open or shorted, Restraints Ignition Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1123 Lincoln indicates Restraints Ignition Relay.
Common causes: Common causes include Faulty Restraints Ignition Relay, Restraints Ignition Relay harness is open or shorted, Restraints Ignition Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 940

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1123 Lincoln Description

The Battery Energy Control Module (BECMB) provides battery voltage to the Restraints Control Module (RCM) and, if equipped, Passenger Airbag Deactivation (PAD) indicator (vehicles without center stack display only). The BECMB monitors each circuit for a short to voltage or a short to ground. If a fault is detected, the BECMB stores the appropriate Diagnostic Trouble Code (DTC) in memory and sends a message to the RCM over HS-CAN1 and HS-CAN2, indicating that a BECMB fault is present.

OBDII Code B1123 Lincoln - Restraints Ignition Relay - AutoCodes.com — B1123 Lincoln Code - Restraints Ignition Relay

What does this mean?

What are the Possible Causes of the DTC B1123 Lincoln?

Faulty Restraints Ignition Relay
Restraints Ignition Relay harness is open or shorted
Restraints Ignition Relay circuit poor electrical connection
Faulty Restraints Control Module (RCM)

How to Fix the DTC B1123 Lincoln?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1123:11 Restraints Ignition Relay: Circuit Short to Ground
B1123:12 Restraints Ignition Relay: Circuit Short to Battery

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1123 Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1123 Lincoln code?

Need more information on how to fix the B1123 Lincoln code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1123 Lincoln code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1123 Lincoln Code

1. What are the common symptoms of OBDII code B1123 Lincoln (Restraints Ignition Relay)?

The common symptoms of OBDII code B1123 Lincoln include issues with the airbag system, such as the airbag warning light staying on or flashing intermittently.

2. What causes OBDII code B1123 Lincoln to trigger?

OBDII code B1123 Lincoln is typically triggered due to a fault in the Restraints Ignition Relay, which can be caused by a faulty relay itself or issues with the wiring and connections associated with the relay.

3. How can I diagnose the Restraints Ignition Relay issue causing OBDII code B1123 Lincoln?

To diagnose the Restraints Ignition Relay issue causing OBDII code B1123 Lincoln, you can use a diagnostic scan tool to read the code and perform further testing on the relay, wiring, and connections to identify any faults.

4. Is it safe to drive with OBDII code B1123 Lincoln active?

It is not recommended to drive with OBDII code B1123 Lincoln active, as it indicates a potential issue with the airbag system, which is an important safety component in the vehicle.

5. How can I repair OBDII code B1123 Lincoln related to the Restraints Ignition Relay?

To repair OBDII code B1123 Lincoln related to the Restraints Ignition Relay, you may need to replace the faulty relay or repair any wiring or connection issues. It is advised to consult a professional mechanic for proper diagnosis and repair.

6. Can resetting the OBDII code B1123 Lincoln solve the issue temporarily?

Resetting the OBDII code B1123 Lincoln may temporarily turn off the warning light, but it will not fix the underlying issue with the Restraints Ignition Relay. It is essential to address the root cause of the problem for a permanent solution.

7. Are there any DIY tips for troubleshooting OBDII code B1123 Lincoln at home?

While basic troubleshooting like checking the relay connections and fuses can be done at home, diagnosing and repairing OBDII code B1123 Lincoln related to the Restraints Ignition Relay may require specialized tools and expertise, best handled by a professional.

8. How much does it cost to repair OBDII code B1123 Lincoln involving the Restraints Ignition Relay?

The cost of repairing OBDII code B1123 Lincoln can vary depending on the extent of the issue and the labor rates in your area. It is recommended to obtain quotes from different mechanics to compare prices for the repair.

9. Will OBDII code B1123 Lincoln affect the overall performance of the vehicle?

OBDII code B1123 Lincoln related to the Restraints Ignition Relay is primarily related to the airbag system and may not directly impact the overall performance of the vehicle. However, it is crucial to address the issue promptly for safety reasons.

10. Can OBDII code B1123 Lincoln be a recurring problem after repair?

If the underlying cause of OBDII code B1123 Lincoln related to the Restraints Ignition Relay is not properly addressed during repair, it can potentially recur. It is essential to ensure that the relay, wiring, and connections are thoroughly inspected and repaired to prevent future issues.