AutoCodes – Ford – B1082 Ford

B1082 Ford Code - Right Temperature Damper Motor Circuit

Quick Answer

To rotate the temperature blend door actuator, the Heating, Ventilation, and Air Conditioning (HVAC) Module supplies voltage and ground to the temperature blend door actuator through the door actuator motor circuits. Common causes include Faulty Right Temperature Damper Motor, Right Temperature Damper Motor harness is open or shorted, Right Temperature Damper Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1082 Ford indicates Right Temperature Damper Motor Circuit.
Common causes: Common causes include Faulty Right Temperature Damper Motor, Right Temperature Damper Motor harness is open or shorted, Right Temperature Damper Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 26,101

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 12, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1082 Ford Description

To rotate the temperature blend door actuator, the Heating, Ventilation, and Air Conditioning (HVAC) Module supplies voltage and ground to the temperature blend door actuator through the door actuator motor circuits. To reverse the temperature blend door actuator rotation, the HVAC module reverses the voltage and ground circuits.
The temperature blend door actuator feedback resistors are supplied a ground from the HVAC module by the temperature blend door actuator return circuits and a 5-volt reference voltage on the temperature blend door actuator reference circuits. The HVAC module reads the voltage on the temperature blend door actuator feedback circuits to determine the temperature blend door actuator position by the position of the actuator feedback resistor wiper arm.
During an actuator calibration cycle, the HVAC module drives the temperature blend door until the door reaches both internal stops in the HVAC case. If the temperature blend door is temporarily obstructed or binding during a calibration cycle, the HVAC module may interpret this as the actual end of travel for the door. When this condition occurs and the HVAC module commands the actuator to its end of travel, the airflow may not be the expected temperature.

OBDII Code B1082 Ford - Right Temperature Damper Motor Circuit - AutoCodes.com — B1082 Ford Code - Right Temperature Damper Motor Circuit

What does this mean?

What are the Possible Causes of the DTC B1082 Ford?

Faulty Right Temperature Damper Motor
Right Temperature Damper Motor harness is open or shorted
Right Temperature Damper Motor circuit poor electrical connection
Faulty Heating, Ventilation, and Air Conditioning (HVAC) Module

How to Fix the DTC B1082 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1082:11 - Right Temperature Damper Motor: Circuit Short to Ground
B1082:12 - Right Temperature Damper Motor: Circuit Short to Battery
B1082:13 - Right Temperature Damper Motor: Circuit Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1082 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1082 Ford code?

Need more information on how to fix the B1082 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1082 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1082 Ford Code

1. What are the common symptoms of OBDII code B1082 Ford related to the Right Temperature Damper Motor Circuit?

The common symptoms include inconsistent temperature control in the vehicle's HVAC system, the inability to adjust the temperature settings properly, or the HVAC system blowing hot or cold air unexpectedly.

2. What are the possible causes of OBDII code B1082 Ford?

The code B1082 Ford typically indicates a fault with the Right Temperature Damper Motor Circuit, which can be caused by a faulty temperature damper motor, damaged wiring or connectors, a blown fuse, or a malfunctioning HVAC control module.

3. How can I diagnose the issue related to OBDII code B1082 Ford?

Diagnosing the issue involves using a diagnostic scanner to retrieve the trouble codes, checking the operation of the temperature damper motor, inspecting the wiring and connectors for any damage, and testing the HVAC control module for proper functionality.

4. Is it safe to continue driving with OBDII code B1082 Ford triggered?

While the vehicle may still be operable with this code triggered, it is recommended to address the issue promptly to avoid potential discomfort due to temperature control issues and prevent further damage to the HVAC system components.

5. How can I repair OBDII code B1082 Ford related to the Right Temperature Damper Motor Circuit?

Repairing the issue may involve replacing the faulty temperature damper motor, repairing or replacing damaged wiring or connectors, checking and replacing any blown fuses, or reprogramming the HVAC control module if necessary.

6. Can OBDII code B1082 Ford be triggered by a simple issue like a loose connection?

Yes, a loose or poor connection to the temperature damper motor or HVAC control module can trigger the B1082 code. It is recommended to check all connections first before proceeding with more extensive diagnostics or repairs.

7. Are there any DIY tips for addressing OBDII code B1082 Ford at home?

While diagnosing and repairing the issue may require some technical knowledge and tools, DIY enthusiasts can start by checking fuses, inspecting visible wiring for damage, and ensuring all connections to the temperature damper motor are secure before seeking professional help if needed.

8. How much does it typically cost to repair OBDII code B1082 Ford at a mechanic or dealership?

The repair costs for OBDII code B1082 Ford can vary depending on the specific cause of the issue, the labor rates of the service provider, and the cost of any replacement parts needed. It is advisable to obtain quotes from different mechanics or dealerships for an accurate estimate.

9. Can a faulty Right Temperature Damper Motor Circuit cause other issues in the vehicle?

Yes, a faulty temperature damper motor or circuit can lead to inconsistent temperature control, which may affect the overall comfort of the vehicle's occupants. It is essential to address this issue promptly to maintain proper HVAC system functionality.

10. How long does it typically take to repair OBDII code B1082 Ford?

The repair time for OBDII code B1082 Ford can vary depending on the complexity of the issue, the availability of replacement parts, and the experience of the mechanic. In general, the repair process may take a few hours to a full day to complete.