AutoCodes – Honda – B1076 Honda

B1076 Honda Code - Windshield Wiper Signal Error

Quick Answer

The Body Control Module (BCM) monitors the Windshield Wiper Signal. Common causes include Faulty Windshield Wiper Switch, Windshield Wiper Switch harness is open or shorted, Windshield Wiper Switch circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B1076 Honda indicates Windshield Wiper Signal Error.
Common causes: Common causes include Faulty Windshield Wiper Switch, Windshield Wiper Switch harness is open or shorted, Windshield Wiper Switch circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,938

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1076 Honda Description

The Body Control Module (BCM) monitors the Windshield Wiper Signal. The BCM sets the OBDII code when the Windshield Wiper Signal is not to factory specifications.

OBDII Code B1076 Honda - Windshield Wiper Signal Error - AutoCodes.com — B1076 Honda Code - Windshield Wiper Signal Error

What does this mean?

What are the Possible Causes of the DTC B1076 Honda?

Faulty Windshield Wiper Switch
Windshield Wiper Switch harness is open or shorted
Windshield Wiper Switch circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B1076 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1076 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1076 Honda code?

Need more information on how to fix the B1076 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1076 Honda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1076 Honda Code

1. What are common symptoms of OBDII code B1076 in a Honda related to a windshield wiper signal error?

When OBDII code B1076 is triggered in a Honda, common symptoms may include malfunctioning windshield wipers, erratic wiper movement, or complete wiper failure.

2. What are possible causes of OBDII code B1076 indicating a windshield wiper signal error in a Honda?

The windshield wiper signal error indicated by OBDII code B1076 in a Honda may be caused by issues such as a faulty wiper switch, damaged wiring, a defective wiper motor, or a problem with the wiper control module.

3. How can I diagnose the windshield wiper signal error associated with OBDII code B1076 in my Honda?

To diagnose the windshield wiper signal error indicated by OBDII code B1076 in a Honda, you can start by checking the wiper fuse, inspecting the wiper switch, testing the wiper motor, and examining the wiring for any visible damage.

4. Is it safe to continue driving my Honda with OBDII code B1076 related to a windshield wiper signal error?

It is not recommended to continue driving your Honda with OBDII code B1076 indicating a windshield wiper signal error, as malfunctioning wipers can compromise visibility and pose a safety hazard, especially in adverse weather conditions.

5. Can I reset OBDII code B1076 in my Honda to see if the windshield wiper signal error reoccurs?

While you can reset OBDII code B1076 in your Honda using an OBDII scanner, it is essential to address the underlying issue causing the windshield wiper signal error before doing so to prevent the problem from persisting.

6. How much does it typically cost to repair OBDII code B1076 in a Honda related to a windshield wiper signal error?

The cost of repairing OBDII code B1076 in a Honda due to a windshield wiper signal error can vary depending on the specific cause of the issue, but it may range from a simple fuse replacement to more extensive repairs involving the wiper switch or motor.

7. Are there any DIY repair tips for addressing OBDII code B1076 associated with a windshield wiper signal error in my Honda?

If you are experienced with automotive repairs, you may attempt to address OBDII code B1076 related to a windshield wiper signal error in your Honda by checking and replacing the wiper fuse, inspecting and cleaning the wiper switch contacts, and testing the wiper motor for functionality.

8. Can extreme weather conditions or environmental factors trigger OBDII code B1076 in a Honda due to a windshield wiper signal error?

Extreme weather conditions or environmental factors, such as heavy rain, snow, or exposure to harsh sunlight, can potentially exacerbate issues leading to OBDII code B1076 in a Honda related to a windshield wiper signal error.