AutoCodes – Generic – B1061

B1061 Code - Air Bag Sensor Unit

Quick Answer

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1061 indicates Air Bag Sensor Unit.
Common causes: Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,785

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 11, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1061 Description

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Malfunctioning part can be detected by the on-board self-diagnosis system. It detects a shock that exceeds specified level and monitors such systems as the driver and passenger airbag, side airbag, curtain airbag, pre-tensioner seat belts and Occupant Classification System (OCS) operate properly. It contains the G sensors for both frontal and side collisions and spare battery function in case of main battery damage in the collision. The OBDII code sets when the airbag diagnosis sensor unit is out of order or mismatch

OBDII Code B1061 - Air Bag Sensor Unit - AutoCodes.com — B1061 Code - Air Bag Sensor Unit

What does this mean?

What are the Possible Causes of the DTC B1061?

Faulty Air Bag Sensor Unit (Air Bag Control Module)
Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted
Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection

How to Fix the DTC B1061?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1061 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1061 code?

Need more information on how to fix the B1061 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1061 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B1061 Acura — Relay Control Module Lost Communication With Gauge Control Module
B1061 Honda — Relay Control Module Lost Communication With Gauge Control Module
B1061 Infiniti — Air Bag Sensor Unit
B1061 Nissan — Air Bag Sensor Unit

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1061 Code

1. What are common symptoms of OBDII code B1061 regarding the Air Bag Sensor Unit?

- The common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system deployment.

2. What can cause OBDII code B1061 related to the Air Bag Sensor Unit?

- The code B1061 is typically triggered by a faulty airbag sensor unit, damaged wiring, or a malfunction in the airbag control module.

3. How can I diagnose the OBDII code B1061 for the Air Bag Sensor Unit?

- Diagnosing OBDII code B1061 involves using an OBDII scanner to retrieve the code, checking the airbag sensor unit and related wiring for any visible damage, and testing the system components for proper functionality.

4. Is it safe to drive with OBDII code B1061 related to the Air Bag Sensor Unit?

- It is not recommended to drive with OBDII code B1061 active because it indicates potential issues with the airbag system, which is a critical safety feature in a vehicle.

5. What are some repair tips for fixing OBDII code B1061 associated with the Air Bag Sensor Unit?

- Repair tips include checking and repairing any damaged wiring, replacing the faulty airbag sensor unit, and resetting the airbag system to clear the code.

6. Can I reset OBDII code B1061 for the Air Bag Sensor Unit myself?

- You can attempt to clear the code by using an OBDII scanner to reset the system after making necessary repairs. However, it's crucial to ensure the underlying issue causing the code is properly addressed.

7. How much does it typically cost to repair OBDII code B1061 for the Air Bag Sensor Unit?

- The cost of repairing OBDII code B1061 can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

8. Are there any safety precautions to consider when working on the Air Bag Sensor Unit to resolve OBDII code B1061?

- When working on the airbag system to address OBDII code B1061, it's essential to disconnect the vehicle's battery and wait for a specific period to deactivate the airbag system to prevent accidental deployment.

9. Can a DIY enthusiast with basic automotive knowledge fix OBDII code B1061 associated with the Air Bag Sensor Unit?

- While some basic repairs like checking wiring connections can be done by DIY enthusiasts, diagnosing and repairing more complex issues related to the airbag system may require specialized tools and expertise.

10. Will OBDII code B1061 for the Air Bag Sensor Unit affect the vehicle's overall performance?

- OBDII code B1061 itself may not directly impact the vehicle's performance, but it signifies a critical safety issue with the airbag system that needs to be addressed promptly to ensure proper functioning in case of an accident.